LONGER
LONGER RAY5 20W Laser Engraver & Rotary Roller
A 20 W laser engraver supplied with a rotary roller for cylindrical workpieces
Option 20W+Rotary Roller
- 20W+Rotary Roller
- 20W+Air Assist kit
- 20w + 8 Pcs Riser Pads
- 20W+Roller Kits
- 20W+Lightbum Camera
- 20W+Laser Engrave Enclosure
- 20W+Material Pack
- 20W+500*500
- 20W+200*300
- 20W+400*400
- 20W+Y-Axis Expansion Kit
- 20W+Aluminum Cards 100 PCS
Prikaži še 1 konfiguracij
- 20 W laser power cuts and engraves thicker materials
- Rotary roller included enables cylindrical object engraving
- Open-frame design provides large work area access
- Compatible with popular engraving software for flexible workflow
LONGER RAY5 20W Laser Engraver
The LONGER RAY5 20W is a diode laser engraver supplied with a rotary roller attachment. It is intended for makers, hobbyists and small workshops that need to mark or cut flat materials and cylindrical objects in a single desktop unit. The 20W optical output handles wood, acrylic, leather and coated metals for personalisation and prototype work.
Practical limits of diode laser engraving
Diode lasers at this power level cannot cut thick or highly reflective metals and are slower than CO2 systems on dense materials. The rotary roller accommodates only cylinders that fit its diameter and length range, so very large or tapered items cannot be rotated. Eye protection and fume extraction are mandatory for safe operation.
Poudarki
- 20 W laser power cuts and engraves thicker materials
- Rotary roller included enables cylindrical object engraving
- Open-frame design provides large work area access
- Compatible with popular engraving software for flexible workflow
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Druge različice tega modela
še 5 v isti paleti
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Vprašanja o tem izdelku
Should I choose the 20W model or a lower-powered version for engraving cylindrical objects?
The 20W laser module paired with the included rotary roller provides enough power to mark curved surfaces like tumblers and pens in fewer passes than lower-wattage units.
How does the 20W rating translate to actual cutting depth on wood?
At 20W optical output the engraver can cleanly cut through 5–8 mm basswood or plywood in a single pass, while thinner materials like leather or paper cut almost instantly.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
