Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small bare e-paper display module, 2.66 inch, 296 by 152 pixels, black and white, no PCB visible

LORDWORLD

LORDWORLD 2.66inch E-Paper Raw Display 296×152 development board

SKU CH-2C2E-K94CQ

A 2.66-inch e-paper raw display with 296×152 resolution retains images without power and draws current only during refresh

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

2.66inch E-Paper Raw Display

This 2.66inch E-Paper raw display offers a 296×152 pixel black and white panel designed for Raspberry Pi and Jetson Nano development. It operates without a backlight and retains the last shown content after power is removed. Ultra low power consumption means energy is only needed during screen refresh cycles. The module is supplied without a PCB for direct integration.

Projects needing faster refresh or colour

The display suits low-frequency updates such as sensor readouts, badge labels or shelf tags where static information persists for long periods. It is not suited to applications requiring video-rate animation, full colour reproduction or touch interaction. Builders needing higher resolution, partial refresh control or an integrated driver board should evaluate alternative modules. The SPI interface supports straightforward wiring to compatible single-board computers.

Põhijooned

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

What are the exact pixel dimensions of the 2.66inch E-Paper display?

The display resolution is 296×152 pixels in black and white dual-colour mode.

How is the SPI raw display connected to a Raspberry Pi or Jetson Nano?

Wire the SPI pins directly to the host GPIO header; the module has no onboard PCB so you must solder or use a compatible adapter board.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.