Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small bare e-paper display module, 2.66 inch, 296 by 152 pixels, black and white, no PCB visible

LORDWORLD

LORDWORLD 2.66inch E-Paper Raw Display 296×152 development board

SKU CH-2C2E-K94CQ

A 2.66-inch e-paper raw display with 296×152 resolution retains images without power and draws current only during refresh

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

2.66inch E-Paper Raw Display

This 2.66inch E-Paper raw display offers a 296×152 pixel black and white panel designed for Raspberry Pi and Jetson Nano development. It operates without a backlight and retains the last shown content after power is removed. Ultra low power consumption means energy is only needed during screen refresh cycles. The module is supplied without a PCB for direct integration.

Projects needing faster refresh or colour

The display suits low-frequency updates such as sensor readouts, badge labels or shelf tags where static information persists for long periods. It is not suited to applications requiring video-rate animation, full colour reproduction or touch interaction. Builders needing higher resolution, partial refresh control or an integrated driver board should evaluate alternative modules. The SPI interface supports straightforward wiring to compatible single-board computers.

Přednosti

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

What are the exact pixel dimensions of the 2.66inch E-Paper display?

The display resolution is 296×152 pixels in black and white dual-colour mode.

How is the SPI raw display connected to a Raspberry Pi or Jetson Nano?

Wire the SPI pins directly to the host GPIO header; the module has no onboard PCB so you must solder or use a compatible adapter board.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.