Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small bare e-paper display module, 2.66 inch, 296 by 152 pixels, black and white, no PCB visible

LORDWORLD

LORDWORLD 2.66inch E-Paper Raw Display 296×152 development board

SKU CH-2C2E-K94CQ

A 2.66-inch e-paper raw display with 296×152 resolution retains images without power and draws current only during refresh

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

2.66inch E-Paper Raw Display

This 2.66inch E-Paper raw display offers a 296×152 pixel black and white panel designed for Raspberry Pi and Jetson Nano development. It operates without a backlight and retains the last shown content after power is removed. Ultra low power consumption means energy is only needed during screen refresh cycles. The module is supplied without a PCB for direct integration.

Projects needing faster refresh or colour

The display suits low-frequency updates such as sensor readouts, badge labels or shelf tags where static information persists for long periods. It is not suited to applications requiring video-rate animation, full colour reproduction or touch interaction. Builders needing higher resolution, partial refresh control or an integrated driver board should evaluate alternative modules. The SPI interface supports straightforward wiring to compatible single-board computers.

I korthet

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

Specifikationer

BrandLORDWORLD

Frågor om den här produkten

What are the exact pixel dimensions of the 2.66inch E-Paper display?

The display resolution is 296×152 pixels in black and white dual-colour mode.

How is the SPI raw display connected to a Raspberry Pi or Jetson Nano?

Wire the SPI pins directly to the host GPIO header; the module has no onboard PCB so you must solder or use a compatible adapter board.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.