暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small bare e-paper display module, 2.66 inch, 296 by 152 pixels, black and white, no PCB visible

LORDWORLD

LORDWORLD 2.66inch E-Paper Raw Display 296×152 development board

SKU CH-2C2E-K94CQ

A 2.66-inch e-paper raw display with 296×152 resolution retains images without power and draws current only during refresh

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

2.66inch E-Paper Raw Display

This 2.66inch E-Paper raw display offers a 296×152 pixel black and white panel designed for Raspberry Pi and Jetson Nano development. It operates without a backlight and retains the last shown content after power is removed. Ultra low power consumption means energy is only needed during screen refresh cycles. The module is supplied without a PCB for direct integration.

Projects needing faster refresh or colour

The display suits low-frequency updates such as sensor readouts, badge labels or shelf tags where static information persists for long periods. It is not suited to applications requiring video-rate animation, full colour reproduction or touch interaction. Builders needing higher resolution, partial refresh control or an integrated driver board should evaluate alternative modules. The SPI interface supports straightforward wiring to compatible single-board computers.

特長

  • Retains image without power thanks to zero-backlight design
  • Ultra-low consumption draws energy only during screen refresh
  • 66-inch 296×152 pixel dual-colour E-Ink panel
  • SPI interface connects directly to Raspberry Pi or Jetson Nano

仕様

BrandLORDWORLD

この商品に関する質問

What are the exact pixel dimensions of the 2.66inch E-Paper display?

The display resolution is 296×152 pixels in black and white dual-colour mode.

How is the SPI raw display connected to a Raspberry Pi or Jetson Nano?

Wire the SPI pins directly to the host GPIO header; the module has no onboard PCB so you must solder or use a compatible adapter board.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。