Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small square 2.8 inch touch display module with microSD slot and pin headers

LORDWORLD

LORDWORLD 2.8inch Touch Display Module 320×240 262K Colors SPI XPT2046 ST7789

SKU CH-H5RR-7XK4V

A 2.8 inch touch display with 320×240 resolution, 262K colours, a dedicated XPT2046 controller, microSD slot and programmable backlight for Raspberry Pi Pico development

  • 320×240 IPS panel delivers clear, colourful images
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct on-screen display
  • Programmable backlight control reduces power consumption
  • Pico-ready C/C++ and MicroPython examples accelerate development

Compact touchscreen for Pico projects

The LORDWORLD 2.8inch module adds a 320×240 IPS panel with 262K colours to Raspberry Pi Pico boards. A dedicated XPT2046 controller drives the resistive touch layer, while the ST7789 handles display duties over a single SPI bus. MicroPython and C/C++ examples are included to accelerate development.

320×240 pixels with onboard image storage

The screen resolves 320 by 240 pixels and renders 262K colours for clear graphics and text. A MicroSD card slot lets you store bitmaps locally and show them without streaming from the host, which is handy for splash screens or simple GUIs. Complex animations or video playback will exceed the SPI throughput and the controller’s frame-buffer limits.

Low-power backlight and quiet operation

The backlight is software-controlled so you can dim or disable it to save current when the project idles. No fan or active cooling is present, so the board runs silently. Power draw stays modest because the SPI interface and the two driver chips are the only active components during normal use.

Põhijooned

  • 320×240 IPS panel delivers clear, colourful images
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct on-screen display
  • Programmable backlight control reduces power consumption
  • Pico-ready C/C++ and MicroPython examples accelerate development

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

Will the 2.8inch SPI display share the bus cleanly with other sensors I keep on my Raspberry Pi Pico?

The module uses the SPI bus with the ST7789 driver and XPT2046 touch controller, so it can share the bus with other SPI devices as long as each has its own chip-select line.

How can I verify the 320×240 IPS panel and XPT2046 touch are working after wiring it up?

Run the supplied Raspberry Pi Pico C/C++ or MicroPython example; the screen should show a 262K-colour test pattern and the touch coordinates should print to the console when pressed.

Does the box include a MicroSD card for the onboard slot or must I buy one separately?

The module has a MicroSD card slot for storing and displaying images, but no card is included — you need to supply your own.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.