저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small square 2.8 inch touch display module with microSD slot and pin headers

LORDWORLD

LORDWORLD 2.8inch Touch Display Module 320×240 262K Colors SPI XPT2046 ST7789

SKU CH-H5RR-7XK4V

A 2.8 inch touch display with 320×240 resolution, 262K colours, a dedicated XPT2046 controller, microSD slot and programmable backlight for Raspberry Pi Pico development

  • 320×240 IPS panel delivers clear, colourful images
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct on-screen display
  • Programmable backlight control reduces power consumption
  • Pico-ready C/C++ and MicroPython examples accelerate development

Compact touchscreen for Pico projects

The LORDWORLD 2.8inch module adds a 320×240 IPS panel with 262K colours to Raspberry Pi Pico boards. A dedicated XPT2046 controller drives the resistive touch layer, while the ST7789 handles display duties over a single SPI bus. MicroPython and C/C++ examples are included to accelerate development.

320×240 pixels with onboard image storage

The screen resolves 320 by 240 pixels and renders 262K colours for clear graphics and text. A MicroSD card slot lets you store bitmaps locally and show them without streaming from the host, which is handy for splash screens or simple GUIs. Complex animations or video playback will exceed the SPI throughput and the controller’s frame-buffer limits.

Low-power backlight and quiet operation

The backlight is software-controlled so you can dim or disable it to save current when the project idles. No fan or active cooling is present, so the board runs silently. Power draw stays modest because the SPI interface and the two driver chips are the only active components during normal use.

주요 특징

  • 320×240 IPS panel delivers clear, colourful images
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct on-screen display
  • Programmable backlight control reduces power consumption
  • Pico-ready C/C++ and MicroPython examples accelerate development

사양

BrandLORDWORLD

이 상품에 대한 질문

Will the 2.8inch SPI display share the bus cleanly with other sensors I keep on my Raspberry Pi Pico?

The module uses the SPI bus with the ST7789 driver and XPT2046 touch controller, so it can share the bus with other SPI devices as long as each has its own chip-select line.

How can I verify the 320×240 IPS panel and XPT2046 touch are working after wiring it up?

Run the supplied Raspberry Pi Pico C/C++ or MicroPython example; the screen should show a 262K-colour test pattern and the touch coordinates should print to the console when pressed.

Does the box include a MicroSD card for the onboard slot or must I buy one separately?

The module has a MicroSD card slot for storing and displaying images, but no card is included — you need to supply your own.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.