BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279164BTC
Laos
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 2Rx8 1.2V UDIMM SuperMicro SYS-530AD-I memory upgrade
A 128GB kit of four 32GB DDR4 3200 CL22 UDIMMs built for the SuperMicro SYS-530AD-I
- Capacity128GB (4 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity for heavy workloads
- DDR4 3200 speed with CL22 latency
- 2 V low-voltage operation saves power
- 2Rx8 dual-rank modules maximise density
- Validated for SuperMicro SYS-530AD-I workstations
Targeted upgrade for SuperMicro SYS-530AD-I
This 128 GB kit delivers four 32 GB DDR4 3200 modules built to the SuperMicro SYS-530AD-I specification. Unbuffered non-ECC UDIMMs run at 1.20 V with CL22 latency. The 2Rx8 organisation and 288-pin form factor match the workstation's memory slots directly.
Replaces lower-capacity DDR4 DIMMs
Swapping out smaller or slower DDR4 sticks for this kit raises total memory to 128 GB and sets the data rate to PC4-25600. The jump is worthwhile when workloads exceed the previous limit or when the original modules run below 3200 MT/s. Systems already populated with 3200 MT/s non-ECC UDIMMs gain capacity without a speed change.
Fits four UDIMM slots on the SuperMicro board
Four 288-pin slots are required, each accepting a 1.20 V unbuffered module. The kit frees no additional slots beyond the four it occupies. Builds needing ECC, registered DIMMs or a different DDR generation cannot use these modules.
Põhijooned
- 128 GB total capacity for heavy workloads
- DDR4 3200 speed with CL22 latency
- 2 V low-voltage operation saves power
- 2Rx8 dual-rank modules maximise density
- Validated for SuperMicro SYS-530AD-I workstations
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
Does this kit use 288-pin UDIMM modules that fit a standard desktop DIMM slot?
Yes, the four 32 GB modules are 288-pin DDR4 UDIMMs designed for standard unbuffered desktop DIMM slots.
Do I need to enable XMP in the BIOS to reach 3200 MT/s, or will it run at that speed by default?
The modules are rated DDR4 3200 CL22 at 1.20 V; they will operate at that speed once installed and the BIOS is set to the rated profile.
Are the chips covered by a heat spreader, and will I ever need to replace a thermal pad?
The kit has no heat spreader, so there are no thermal pads to maintain or replace over time.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
