Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green circuit boards with black chips, no heat spreaders, 288-pin DDR4 UDIMM form factor

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 2Rx8 1.2V UDIMM SuperMicro SYS-530AD-I memory upgrade

SKU CH-1W14-2HW4G

A 128GB kit of four 32GB DDR4 3200 CL22 UDIMMs built for the SuperMicro SYS-530AD-I

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity for heavy workloads
  • DDR4 3200 speed with CL22 latency
  • 2 V low-voltage operation saves power
  • 2Rx8 dual-rank modules maximise density
  • Validated for SuperMicro SYS-530AD-I workstations

Targeted upgrade for SuperMicro SYS-530AD-I

This 128 GB kit delivers four 32 GB DDR4 3200 modules built to the SuperMicro SYS-530AD-I specification. Unbuffered non-ECC UDIMMs run at 1.20 V with CL22 latency. The 2Rx8 organisation and 288-pin form factor match the workstation's memory slots directly.

Replaces lower-capacity DDR4 DIMMs

Swapping out smaller or slower DDR4 sticks for this kit raises total memory to 128 GB and sets the data rate to PC4-25600. The jump is worthwhile when workloads exceed the previous limit or when the original modules run below 3200 MT/s. Systems already populated with 3200 MT/s non-ECC UDIMMs gain capacity without a speed change.

Fits four UDIMM slots on the SuperMicro board

Four 288-pin slots are required, each accepting a 1.20 V unbuffered module. The kit frees no additional slots beyond the four it occupies. Builds needing ECC, registered DIMMs or a different DDR generation cannot use these modules.

Points forts

  • 128 GB total capacity for heavy workloads
  • DDR4 3200 speed with CL22 latency
  • 2 V low-voltage operation saves power
  • 2Rx8 dual-rank modules maximise density
  • Validated for SuperMicro SYS-530AD-I workstations

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions sur cet article

Does this kit use 288-pin UDIMM modules that fit a standard desktop DIMM slot?

Yes, the four 32 GB modules are 288-pin DDR4 UDIMMs designed for standard unbuffered desktop DIMM slots.

Do I need to enable XMP in the BIOS to reach 3200 MT/s, or will it run at that speed by default?

The modules are rated DDR4 3200 CL22 at 1.20 V; they will operate at that speed once installed and the BIOS is set to the rated profile.

Are the chips covered by a heat spreader, and will I ever need to replace a thermal pad?

The kit has no heat spreader, so there are no thermal pads to maintain or replace over time.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.