BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278333BTC
På lager
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 3200 CL22 2Rx8 1.2V UDIMM SuperMicro SYS-530AD-I memory upgrade
A 128GB kit of four 32GB DDR4 3200 CL22 UDIMMs built for the SuperMicro SYS-530AD-I
- Capacity128GB (4 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity for heavy workloads
- DDR4 3200 speed with CL22 latency
- 2 V low-voltage operation saves power
- 2Rx8 dual-rank modules maximise density
- Validated for SuperMicro SYS-530AD-I workstations
Targeted upgrade for SuperMicro SYS-530AD-I
This 128 GB kit delivers four 32 GB DDR4 3200 modules built to the SuperMicro SYS-530AD-I specification. Unbuffered non-ECC UDIMMs run at 1.20 V with CL22 latency. The 2Rx8 organisation and 288-pin form factor match the workstation's memory slots directly.
Replaces lower-capacity DDR4 DIMMs
Swapping out smaller or slower DDR4 sticks for this kit raises total memory to 128 GB and sets the data rate to PC4-25600. The jump is worthwhile when workloads exceed the previous limit or when the original modules run below 3200 MT/s. Systems already populated with 3200 MT/s non-ECC UDIMMs gain capacity without a speed change.
Fits four UDIMM slots on the SuperMicro board
Four 288-pin slots are required, each accepting a 1.20 V unbuffered module. The kit frees no additional slots beyond the four it occupies. Builds needing ECC, registered DIMMs or a different DDR generation cannot use these modules.
Høydepunkter
- 128 GB total capacity for heavy workloads
- DDR4 3200 speed with CL22 latency
- 2 V low-voltage operation saves power
- 2Rx8 dual-rank modules maximise density
- Validated for SuperMicro SYS-530AD-I workstations
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Spørsmål om denne varen
Does this kit use 288-pin UDIMM modules that fit a standard desktop DIMM slot?
Yes, the four 32 GB modules are 288-pin DDR4 UDIMMs designed for standard unbuffered desktop DIMM slots.
Do I need to enable XMP in the BIOS to reach 3200 MT/s, or will it run at that speed by default?
The modules are rated DDR4 3200 CL22 at 1.20 V; they will operate at that speed once installed and the BIOS is set to the rated profile.
Are the chips covered by a heat spreader, and will I ever need to replace a thermal pad?
The kit has no heat spreader, so there are no thermal pads to maintain or replace over time.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280922BTC
På lager
