Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green PCB with M.2 slot flat flex cable rubber feet and mounting hardware

Pimoroni

Pimoroni PIM699 Raspberry Pi 5 NVMe Base PCIe Extension Board

SKU CH-NQJ3-VSG7Y

PCIe extension board adds M-key NVMe SSD storage (2230 to 2280) to Raspberry Pi 5 with mounting hardware included

M.2 Slots Single

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Pimoroni NVMe Base for Raspberry Pi 5

The Pimoroni PIM699 is a PCIe extension board that adds an M-key NVMe slot to the Raspberry Pi 5. It accepts M.2 drives from 2230 to 2280 lengths and mounts beneath the single-board computer using the included standoffs and rubber feet. A flat-flex cable carries the PCIe signals between the base and the Pi.

Ideal for compact file servers or media centres

Makers building a NAS, reverse proxy or any workload that benefits from high random IOPS will gain fast boot and application performance. The board supports the Raspberry Pi PCIe specification and works with current Raspberry Pi OS when firmware is dated 2023-12-06 or newer. Builders who need more than one NVMe drive, or who want to use storage interfaces other than the single M-key slot provided, will not find those options here.

Single M-key NVMe slot with 2230 to 2280 support

The decisive specification is the single M-key slot that accommodates NVMe drives from 2230 up to 2280 form factors. This determines which solid-state drives can be installed and limits the board to one high-speed storage device at a time.

Põhijooned

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Selle mudeli teised versioonid

1 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will the M.2 2230 to 2280 NVMe SSD need any firmware updates or maintenance after installation?

The board follows Raspberry Pi PIP design guidelines for long-term OS support; keep Raspberry Pi OS and RPi 5 firmware at 2023-12-06 or newer for hassle-free operation.

What is the first limit reached under sustained heavy I/O workloads?

The PCIe Gen 3 x1 lane caps sustained throughput, so sequential speeds and random IOPS will plateau at that interface ceiling.

How much extra heat or power does the NVMe Base add when the Pi 5 runs all day?

The board itself is passive with no active cooling; thermal load comes only from the installed NVMe SSD, which typically draws a few watts under load.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.