Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green PCB with M.2 slot flat flex cable rubber feet and mounting hardware

Pimoroni

Pimoroni PIM699 Raspberry Pi 5 NVMe Base PCIe Extension Board

SKU CH-NQJ3-VSG7Y

PCIe extension board adds M-key NVMe SSD storage (2230 to 2280) to Raspberry Pi 5 with mounting hardware included

M.2 Slots Single

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Pimoroni NVMe Base for Raspberry Pi 5

The Pimoroni PIM699 is a PCIe extension board that adds an M-key NVMe slot to the Raspberry Pi 5. It accepts M.2 drives from 2230 to 2280 lengths and mounts beneath the single-board computer using the included standoffs and rubber feet. A flat-flex cable carries the PCIe signals between the base and the Pi.

Ideal for compact file servers or media centres

Makers building a NAS, reverse proxy or any workload that benefits from high random IOPS will gain fast boot and application performance. The board supports the Raspberry Pi PCIe specification and works with current Raspberry Pi OS when firmware is dated 2023-12-06 or newer. Builders who need more than one NVMe drive, or who want to use storage interfaces other than the single M-key slot provided, will not find those options here.

Single M-key NVMe slot with 2230 to 2280 support

The decisive specification is the single M-key slot that accommodates NVMe drives from 2230 up to 2280 form factors. This determines which solid-state drives can be installed and limits the board to one high-speed storage device at a time.

Istaknuto

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Druge verzije ovog modela

još 1 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the M.2 2230 to 2280 NVMe SSD need any firmware updates or maintenance after installation?

The board follows Raspberry Pi PIP design guidelines for long-term OS support; keep Raspberry Pi OS and RPi 5 firmware at 2023-12-06 or newer for hassle-free operation.

What is the first limit reached under sustained heavy I/O workloads?

The PCIe Gen 3 x1 lane caps sustained throughput, so sequential speeds and random IOPS will plateau at that interface ceiling.

How much extra heat or power does the NVMe Base add when the Pi 5 runs all day?

The board itself is passive with no active cooling; thermal load comes only from the installed NVMe SSD, which typically draws a few watts under load.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.