Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB with M.2 slot flat flex cable rubber feet and mounting hardware

Pimoroni

Pimoroni PIM699 Raspberry Pi 5 NVMe Base PCIe Extension Board

SKU CH-NQJ3-VSG7Y

PCIe extension board adds M-key NVMe SSD storage (2230 to 2280) to Raspberry Pi 5 with mounting hardware included

M.2 Slots Single

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Pimoroni NVMe Base for Raspberry Pi 5

The Pimoroni PIM699 is a PCIe extension board that adds an M-key NVMe slot to the Raspberry Pi 5. It accepts M.2 drives from 2230 to 2280 lengths and mounts beneath the single-board computer using the included standoffs and rubber feet. A flat-flex cable carries the PCIe signals between the base and the Pi.

Ideal for compact file servers or media centres

Makers building a NAS, reverse proxy or any workload that benefits from high random IOPS will gain fast boot and application performance. The board supports the Raspberry Pi PCIe specification and works with current Raspberry Pi OS when firmware is dated 2023-12-06 or newer. Builders who need more than one NVMe drive, or who want to use storage interfaces other than the single M-key slot provided, will not find those options here.

Single M-key NVMe slot with 2230 to 2280 support

The decisive specification is the single M-key slot that accommodates NVMe drives from 2230 up to 2280 form factors. This determines which solid-state drives can be installed and limits the board to one high-speed storage device at a time.

Kohokohdat

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the M.2 2230 to 2280 NVMe SSD need any firmware updates or maintenance after installation?

The board follows Raspberry Pi PIP design guidelines for long-term OS support; keep Raspberry Pi OS and RPi 5 firmware at 2023-12-06 or newer for hassle-free operation.

What is the first limit reached under sustained heavy I/O workloads?

The PCIe Gen 3 x1 lane caps sustained throughput, so sequential speeds and random IOPS will plateau at that interface ceiling.

How much extra heat or power does the NVMe Base add when the Pi 5 runs all day?

The board itself is passive with no active cooling; thermal load comes only from the installed NVMe SSD, which typically draws a few watts under load.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.