Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green PCB with M.2 slot flat flex cable rubber feet and mounting hardware

Pimoroni

Pimoroni PIM699 Raspberry Pi 5 NVMe Base PCIe Extension Board

SKU CH-NQJ3-VSG7Y

PCIe extension board adds M-key NVMe SSD storage (2230 to 2280) to Raspberry Pi 5 with mounting hardware included

M.2 Slots Single

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Pimoroni NVMe Base for Raspberry Pi 5

The Pimoroni PIM699 is a PCIe extension board that adds an M-key NVMe slot to the Raspberry Pi 5. It accepts M.2 drives from 2230 to 2280 lengths and mounts beneath the single-board computer using the included standoffs and rubber feet. A flat-flex cable carries the PCIe signals between the base and the Pi.

Ideal for compact file servers or media centres

Makers building a NAS, reverse proxy or any workload that benefits from high random IOPS will gain fast boot and application performance. The board supports the Raspberry Pi PCIe specification and works with current Raspberry Pi OS when firmware is dated 2023-12-06 or newer. Builders who need more than one NVMe drive, or who want to use storage interfaces other than the single M-key slot provided, will not find those options here.

Single M-key NVMe slot with 2230 to 2280 support

The decisive specification is the single M-key slot that accommodates NVMe drives from 2230 up to 2280 form factors. This determines which solid-state drives can be installed and limits the board to one high-speed storage device at a time.

Privalumai

  • Adds super-fast NVMe storage to Raspberry Pi 5
  • Supports M-key NVMe SSDs from 2230 to 2280 sizes
  • Flat flex PCIe cable connects board to Pi
  • Includes rubber feet and full mounting hardware kit
  • Follows Raspberry Pi PIP design guidelines for long-term support

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Kiti šio modelio variantai

Dar 1 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the M.2 2230 to 2280 NVMe SSD need any firmware updates or maintenance after installation?

The board follows Raspberry Pi PIP design guidelines for long-term OS support; keep Raspberry Pi OS and RPi 5 firmware at 2023-12-06 or newer for hassle-free operation.

What is the first limit reached under sustained heavy I/O workloads?

The PCIe Gen 3 x1 lane caps sustained throughput, so sequential speeds and random IOPS will plateau at that interface ceiling.

How much extra heat or power does the NVMe Base add when the Pi 5 runs all day?

The board itself is passive with no active cooling; thermal load comes only from the installed NVMe SSD, which typically draws a few watts under load.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.