PNY Technologies, Inc. CS1030 M280CS1030-1TB-RB 1TB internal SSD
- Internal Solid Stat…
- Consumer
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
PNY Technologies, Inc.
500 GB M.2 2280 internal SSD with NVMe 1.3 interface delivering up to 2000 MB/s read and 1100 MB/s write speeds
Options 500GB CS1030
The PNY CS1030 is a 500GB internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and the NVMe 1.3 protocol to deliver faster boot times and quicker application launches. Sequential reads reach up to 2000 MB/s and writes up to 1100 MB/s. The drive has no moving parts and an MTBF of 2000000 hours.
Your motherboard or laptop must provide an M.2 2280 slot keyed for NVMe PCIe 3.0 x4 operation. Verify the firmware supports NVMe 1.3 boot if you plan to use this as the primary OS drive. Confirm the physical clearance allows a single-sided 4.00mm module. Older platforms limited to SATA or PCIe 2.0 will not achieve the stated speeds.
The drive operates between 0°C and 70°C and stores safely from -40°C to 85°C. Low power consumption helps extend battery life in laptops and keeps heat output minimal. With no moving parts the drive runs silently. Typical workloads stay well within the thermal envelope without active cooling.
| Brand | PNY |
|---|---|
| Series | CS1030 |
| Model | M280CS1030-500-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 2000 MBps |
| Max Sequential Write | Up to 1100 MBps |
| MTBF | 2,000,000 hours |
| Features | Sequential Read of up to 2,000 MB/s and Write of up to 1,100 MB/s Faster boot up and quicker application launch Better overall system performance Highly durable, with not moving parts and can withstand extreme environments Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Tarnekaal | 0.03 kg |
| Pakendi mõõtmed | 148 × 100 × 16 mm |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The drive is supplied as a bare M.2 2280 module; no heatsink or mounting screw is included.
The 500GB model delivers up to 2000 MB/s read and 1100 MB/s write; larger capacities in the same series typically offer higher sustained write performance.
Yes, the drive is rated for up to 2000 MB/s sequential read and 1100 MB/s sequential write over a PCIe 3.0 x4 NVMe 1.3 link.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?