Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two black aluminium heatsink DDR4 memory modules side by side

PUSKILL

PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM

SKU CH-VKQQ-7E2M4

A 16 GB dual-channel kit running at 3200 MHz with CL16-18-18-42 timings and a 1.35 V aluminium heatsink

  • CAS Latency16
  • Capacity16GB (2 x 8GB)

capacity DDR4 8GBx2 3200MHz

Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Gaming Sweet Spot Kit

This 16GB kit uses two matched 8GB DDR4 modules to deliver the capacity most mainstream gaming builds need. It targets desktop owners who want to remove stuttering and handle heavy multitasking at 1080p and 1440p without overspending on unused headroom.

XMP 2.0 Profile Requirement

The advertised 3200MHz speed and CL16-18-18-42 timings only activate when you enable the XMP 2.0 profile on Intel or DOCP on AMD in the BIOS. Without that step the modules run at standard JEDEC speeds of 2133, 2400 or 2666MHz, so the performance uplift depends entirely on motherboard and CPU support for the profile.

Aluminium Heatsink Thermal Limit

The aluminium heat spreader keeps temperatures in check during extended gaming sessions, preventing throttling while the dual-channel layout doubles bandwidth for faster loads. Buyers who need more than 16GB total capacity or speeds above 3200MHz will have to look elsewhere, as this kit maxes out at the stated frequency and density.

Põhijooned

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Tehnilised andmed

CAS Latency16
Capacity16GB (2 x 8GB)
BrandPUSKILL
ModelDDR4

Selle mudeli teised versioonid

2 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will this kit run at 3200 MHz automatically after I install it?

The modules default to standard JEDEC speeds of 2133, 2400 or 2666 MHz. You must enable the XMP 2.0 profile in the motherboard BIOS to reach the rated 3200 MHz and CL16-18-18-42 timings.

Is this memory compatible with my laptop?

No. These are 288-pin desktop UDIMMs and will not fit laptop SO-DIMM slots.

What do I need to check before buying to ensure the rated speed works?

Confirm that both your CPU and motherboard support XMP 2.0. If either does not, the kit will run at the standard JEDEC frequency instead of 3200 MHz.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.