Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black aluminium heatsink DDR4 memory modules side by side

PUSKILL

PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM

SKU CH-VKQQ-7E2M4

A 16 GB dual-channel kit running at 3200 MHz with CL16-18-18-42 timings and a 1.35 V aluminium heatsink

  • CAS Latency16
  • Capacity16GB (2 x 8GB)

capacity DDR4 8GBx2 3200MHz

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Gaming Sweet Spot Kit

This 16GB kit uses two matched 8GB DDR4 modules to deliver the capacity most mainstream gaming builds need. It targets desktop owners who want to remove stuttering and handle heavy multitasking at 1080p and 1440p without overspending on unused headroom.

XMP 2.0 Profile Requirement

The advertised 3200MHz speed and CL16-18-18-42 timings only activate when you enable the XMP 2.0 profile on Intel or DOCP on AMD in the BIOS. Without that step the modules run at standard JEDEC speeds of 2133, 2400 or 2666MHz, so the performance uplift depends entirely on motherboard and CPU support for the profile.

Aluminium Heatsink Thermal Limit

The aluminium heat spreader keeps temperatures in check during extended gaming sessions, preventing throttling while the dual-channel layout doubles bandwidth for faster loads. Buyers who need more than 16GB total capacity or speeds above 3200MHz will have to look elsewhere, as this kit maxes out at the stated frequency and density.

Priekšrocības

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Specifikācijas

CAS Latency16
Capacity16GB (2 x 8GB)
BrandPUSKILL
ModelDDR4

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this kit run at 3200 MHz automatically after I install it?

The modules default to standard JEDEC speeds of 2133, 2400 or 2666 MHz. You must enable the XMP 2.0 profile in the motherboard BIOS to reach the rated 3200 MHz and CL16-18-18-42 timings.

Is this memory compatible with my laptop?

No. These are 288-pin desktop UDIMMs and will not fit laptop SO-DIMM slots.

What do I need to check before buying to ensure the rated speed works?

Confirm that both your CPU and motherboard support XMP 2.0. If either does not, the kit will run at the standard JEDEC frequency instead of 3200 MHz.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.