PUSKILL
PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM
- 16
- 16GB (2 x 8GB)
79,99 $
0.00101424BTC
Krājumā
PUSKILL
PUSKILL KILLBLADE 32GB (2x16GB) DDR4 3200MHz CL16 RGB Desktop RAM
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 timings, aluminum heat spreaders and RGB lighting
- CAS Latency16
- Multi-channel KitDual Channel Kit
- Timing16-18-18-36
- ChipsetSamsung, Hynix, Micron
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
capacity DDR4 16GBx2 3200MHz
- DDR4 8GBx2 3200MHz
- DDR4 8GBx2 3600MHz
- DDR4 16GBx2 3200MHz
- DDR4 16GBx2 3600MHz
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
- 32 GB capacity handles heavy multitasking and creative workloads
- Dual-channel kit doubles bandwidth for smoother gaming performance
- 3200 MHz speed with CL16 latency delivers responsive system operation
- Aluminium heatsink dissipates heat during extended high-load sessions
- Intel XMP 2.0 profile enables rated speed with one BIOS setting
Capacity & Kit
This PUSKILL KILLBADE kit delivers 32GB across two 16GB DDR4 modules for desktop systems. It is built for power users who run heavy 4K video editing, complex 3D rendering, or simultaneous gaming and streaming workloads.
XMP 2.0 & Compatibility
The kit runs at 3200MHz with CL16-18-18-36 timings when the Intel XMP 2.0 profile is enabled in BIOS; AMD users should enable the equivalent DOCP setting. Without that step the modules operate at 2133MHz, 2400MHz or 2666MHz depending on the platform, so builders who cannot or will not adjust firmware should look elsewhere.
Headroom & Limits
Dual-channel bandwidth handles CPU-intensive games and multi-threaded rendering comfortably at the rated 3200MHz speed. The aluminium heat spreader manages thermals during extended loads, while the 1.35V operating voltage keeps power draw moderate. The memory is non-ECC and unbuffered, so it is unsuitable for workstations that require error correction or registered DIMMs.
Priekšrocības
- 32 GB capacity handles heavy multitasking and creative workloads
- Dual-channel kit doubles bandwidth for smoother gaming performance
- 3200 MHz speed with CL16 latency delivers responsive system operation
- Aluminium heatsink dissipates heat during extended high-load sessions
- Intel XMP 2.0 profile enables rated speed with one BIOS setting
Specifikācijas
| CAS Latency | 16 |
|---|---|
| Multi-channel Kit | Dual Channel Kit |
| Timing | 16-18-18-36 |
| Chipset | Samsung, Hynix, Micron |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| Recommend Use | AMD & Intel Compatible |
| tRAC | 54ns |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | Yes |
| Type | 288-Pin PC RAM |
| BIOS/Performance Profile | Intel XMP 2.0 only |
| Color | Black / White |
| LED Color | RGB |
| Brand | PUSKILL |
| Series | KILLBLADE |
| Model | DDR4 |
Citas šī modeļa versijas
Vēl 2 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
PUSKILL
PUSKILL DDR4 16GB (2x8GB) 3600MHz CL18 RGB desktop RAM
- CL18
- 18-22-22-42
82,99 $
0.00105228BTC
KrājumāJautājumi par šo preci
Will this kit run at 3200MHz without changing any BIOS settings?
The modules default to 2133MHz, 2400MHz or 2666MHz depending on the platform. You must enable the Intel XMP 2.0 profile in the BIOS to reach the rated 3200MHz speed.
Does the kit include any RGB lighting control software or require a specific motherboard header?
The modules feature RGB LEDs. Control is handled through your motherboard's standard RGB header and its own lighting software; no separate utility is bundled with the memory.
What is the module height and will it clear a large CPU air cooler?
The aluminum heat spreader adds height over a bare PCB. Check your CPU cooler's published RAM clearance against the module dimensions before purchasing to ensure physical fit.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497027BTC
Krājumā
