PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM
- 16
- 16GB (2 x 8GB)
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
PUSKILL
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 timings, aluminum heat spreaders and RGB lighting
capacity DDR4 16GBx2 3200MHz
Preškrtnuté verzie existujú, ale nie sú tu skladom.
This PUSKILL KILLBADE kit delivers 32GB across two 16GB DDR4 modules for desktop systems. It is built for power users who run heavy 4K video editing, complex 3D rendering, or simultaneous gaming and streaming workloads.
The kit runs at 3200MHz with CL16-18-18-36 timings when the Intel XMP 2.0 profile is enabled in BIOS; AMD users should enable the equivalent DOCP setting. Without that step the modules operate at 2133MHz, 2400MHz or 2666MHz depending on the platform, so builders who cannot or will not adjust firmware should look elsewhere.
Dual-channel bandwidth handles CPU-intensive games and multi-threaded rendering comfortably at the rated 3200MHz speed. The aluminium heat spreader manages thermals during extended loads, while the 1.35V operating voltage keeps power draw moderate. The memory is non-ECC and unbuffered, so it is unsuitable for workstations that require error correction or registered DIMMs.
| CAS Latency | 16 |
|---|---|
| Multi-channel Kit | Dual Channel Kit |
| Timing | 16-18-18-36 |
| Chipset | Samsung, Hynix, Micron |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| Recommend Use | AMD & Intel Compatible |
| tRAC | 54ns |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | Yes |
| Type | 288-Pin PC RAM |
| BIOS/Performance Profile | Intel XMP 2.0 only |
| Color | Black / White |
| LED Color | RGB |
| Brand | PUSKILL |
| Series | KILLBLADE |
| Model | DDR4 |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The modules default to 2133MHz, 2400MHz or 2666MHz depending on the platform. You must enable the Intel XMP 2.0 profile in the BIOS to reach the rated 3200MHz speed.
The modules feature RGB LEDs. Control is handled through your motherboard's standard RGB header and its own lighting software; no separate utility is bundled with the memory.
The aluminum heat spreader adds height over a bare PCB. Check your CPU cooler's published RAM clearance against the module dimensions before purchasing to ensure physical fit.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?