暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

PUSKILL

PUSKILL KILLBLADE 32GB (2x16GB) DDR4 3200MHz CL16 RGB Desktop RAM

SKU CH-74MD-M2EQS

A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 timings, aluminum heat spreaders and RGB lighting

  • CAS Latency16
  • Multi-channel KitDual Channel Kit
  • Timing16-18-18-36
  • ChipsetSamsung, Hynix, Micron
  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)

capacity DDR4 16GBx2 3200MHz

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • 32 GB capacity handles heavy multitasking and creative workloads
  • Dual-channel kit doubles bandwidth for smoother gaming performance
  • 3200 MHz speed with CL16 latency delivers responsive system operation
  • Aluminium heatsink dissipates heat during extended high-load sessions
  • Intel XMP 2.0 profile enables rated speed with one BIOS setting

Capacity & Kit

This PUSKILL KILLBADE kit delivers 32GB across two 16GB DDR4 modules for desktop systems. It is built for power users who run heavy 4K video editing, complex 3D rendering, or simultaneous gaming and streaming workloads.

XMP 2.0 & Compatibility

The kit runs at 3200MHz with CL16-18-18-36 timings when the Intel XMP 2.0 profile is enabled in BIOS; AMD users should enable the equivalent DOCP setting. Without that step the modules operate at 2133MHz, 2400MHz or 2666MHz depending on the platform, so builders who cannot or will not adjust firmware should look elsewhere.

Headroom & Limits

Dual-channel bandwidth handles CPU-intensive games and multi-threaded rendering comfortably at the rated 3200MHz speed. The aluminium heat spreader manages thermals during extended loads, while the 1.35V operating voltage keeps power draw moderate. The memory is non-ECC and unbuffered, so it is unsuitable for workstations that require error correction or registered DIMMs.

特長

  • 32 GB capacity handles heavy multitasking and creative workloads
  • Dual-channel kit doubles bandwidth for smoother gaming performance
  • 3200 MHz speed with CL16 latency delivers responsive system operation
  • Aluminium heatsink dissipates heat during extended high-load sessions
  • Intel XMP 2.0 profile enables rated speed with one BIOS setting

仕様

CAS Latency16
Multi-channel KitDual Channel Kit
Timing16-18-18-36
ChipsetSamsung, Hynix, Micron
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
Recommend UseAMD & Intel Compatible
tRAC54ns
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderYes
Type288-Pin PC RAM
BIOS/Performance ProfileIntel XMP 2.0 only
ColorBlack / White
LED ColorRGB
BrandPUSKILL
SeriesKILLBLADE
ModelDDR4

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this kit run at 3200MHz without changing any BIOS settings?

The modules default to 2133MHz, 2400MHz or 2666MHz depending on the platform. You must enable the Intel XMP 2.0 profile in the BIOS to reach the rated 3200MHz speed.

Does the kit include any RGB lighting control software or require a specific motherboard header?

The modules feature RGB LEDs. Control is handled through your motherboard's standard RGB header and its own lighting software; no separate utility is bundled with the memory.

What is the module height and will it clear a large CPU air cooler?

The aluminum heat spreader adds height over a bare PCB. Check your CPU cooler's published RAM clearance against the module dimensions before purchasing to ensure physical fit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。