PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM
- 16
- 16GB (2 x 8GB)
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
PUSKILL
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 timings, aluminum heat spreaders and RGB lighting
capacity DDR4 16GBx2 3200MHz
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This PUSKILL KILLBADE kit delivers 32GB across two 16GB DDR4 modules for desktop systems. It is built for power users who run heavy 4K video editing, complex 3D rendering, or simultaneous gaming and streaming workloads.
The kit runs at 3200MHz with CL16-18-18-36 timings when the Intel XMP 2.0 profile is enabled in BIOS; AMD users should enable the equivalent DOCP setting. Without that step the modules operate at 2133MHz, 2400MHz or 2666MHz depending on the platform, so builders who cannot or will not adjust firmware should look elsewhere.
Dual-channel bandwidth handles CPU-intensive games and multi-threaded rendering comfortably at the rated 3200MHz speed. The aluminium heat spreader manages thermals during extended loads, while the 1.35V operating voltage keeps power draw moderate. The memory is non-ECC and unbuffered, so it is unsuitable for workstations that require error correction or registered DIMMs.
| CAS Latency | 16 |
|---|---|
| Multi-channel Kit | Dual Channel Kit |
| Timing | 16-18-18-36 |
| Chipset | Samsung, Hynix, Micron |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| Recommend Use | AMD & Intel Compatible |
| tRAC | 54ns |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | Yes |
| Type | 288-Pin PC RAM |
| BIOS/Performance Profile | Intel XMP 2.0 only |
| Color | Black / White |
| LED Color | RGB |
| Brand | PUSKILL |
| Series | KILLBLADE |
| Model | DDR4 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules default to 2133MHz, 2400MHz or 2666MHz depending on the platform. You must enable the Intel XMP 2.0 profile in the BIOS to reach the rated 3200MHz speed.
The modules feature RGB LEDs. Control is handled through your motherboard's standard RGB header and its own lighting software; no separate utility is bundled with the memory.
The aluminum heat spreader adds height over a bare PCB. Check your CPU cooler's published RAM clearance against the module dimensions before purchasing to ensure physical fit.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?