Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two black aluminium heatsink DDR4 memory modules side by side

PUSKILL

PUSKILL 16GB (2x8GB) DDR4 3200MHz CL16 Desktop RAM

SKU CH-VKQQ-7E2M4

A 16 GB dual-channel kit running at 3200 MHz with CL16-18-18-42 timings and a 1.35 V aluminium heatsink

  • CAS Latency16
  • Capacity16GB (2 x 8GB)

capacity DDR4 8GBx2 3200MHz

Las versiones tachadas existen, pero no están disponibles aquí.

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Gaming Sweet Spot Kit

This 16GB kit uses two matched 8GB DDR4 modules to deliver the capacity most mainstream gaming builds need. It targets desktop owners who want to remove stuttering and handle heavy multitasking at 1080p and 1440p without overspending on unused headroom.

XMP 2.0 Profile Requirement

The advertised 3200MHz speed and CL16-18-18-42 timings only activate when you enable the XMP 2.0 profile on Intel or DOCP on AMD in the BIOS. Without that step the modules run at standard JEDEC speeds of 2133, 2400 or 2666MHz, so the performance uplift depends entirely on motherboard and CPU support for the profile.

Aluminium Heatsink Thermal Limit

The aluminium heat spreader keeps temperatures in check during extended gaming sessions, preventing throttling while the dual-channel layout doubles bandwidth for faster loads. Buyers who need more than 16GB total capacity or speeds above 3200MHz will have to look elsewhere, as this kit maxes out at the stated frequency and density.

Puntos fuertes

  • 16GB dual-channel kit eliminates stuttering in 1080p and 1440p gaming
  • 3200MHz speed with CL16-18-18-42 timings maximizes frame rates when XMP 2.0 is enabled
  • Aluminum heatsink prevents thermal throttling during heavy loads
  • Matched 8GB modules activate dual-channel bandwidth for faster load times
  • 288-pin UDIMM installs in 5 minutes on Intel and AMD desktop motherboards

Especificaciones

CAS Latency16
Capacity16GB (2 x 8GB)
BrandPUSKILL
ModelDDR4

Otras versiones de este modelo

2 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will this kit run at 3200 MHz automatically after I install it?

The modules default to standard JEDEC speeds of 2133, 2400 or 2666 MHz. You must enable the XMP 2.0 profile in the motherboard BIOS to reach the rated 3200 MHz and CL16-18-18-42 timings.

Is this memory compatible with my laptop?

No. These are 288-pin desktop UDIMMs and will not fit laptop SO-DIMM slots.

What do I need to check before buying to ensure the rated speed works?

Confirm that both your CPU and motherboard support XMP 2.0. If either does not, the kit will run at the standard JEDEC frequency instead of 3200 MHz.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.