Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black 2.85 mm filament spool, matte finish, one pound net weight

Taulman 3D

Taulman 3D Alloy 910 Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-V02P-ZTB31

High-performance nylon-based filament prints at 250–255 °C with 8,100 PSI tensile strength and 32 % elongation

  • ColorBlack
  • TypeFilament
  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Material and format

Taulman 3D Alloy 910 is a high-performance nylon-based filament supplied on a 1 lb spool in black. It has a 2.85 mm diameter and prints at 250°C to 255°C with a bed temperature of 30°C to 65°C.

Who it suits and who it does not

Professionals in aerospace, automotive, agriculture, healthcare, product design and general engineering will value the 8,100 psi tensile strength and 32% elongation for strong, stiff parts. Printers limited to lower nozzle temperatures or without a heated bed cannot process this material.

Deciding specification

The 95°C working temperature range defines the operational envelope for printed components. Buyers needing parts that withstand higher continuous heat must select a different polymer.

Põhijooned

  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Tehnilised andmed

Brandtaulman3d
ColorBlack
TypeFilament

Küsimused selle toote kohta

Will the 2.85 mm Alloy 910 filament feed reliably through a Bowden extruder designed for 2.85 mm stock?

Yes — the filament diameter is 2.85 mm, so it matches extruders built for that size.

How can I confirm the Alloy 910 is printing correctly at the recommended 250-255 °C nozzle and 30-65 °C bed temperatures?

Look for strong layer adhesion, minimal warping, and a tensile feel consistent with the 8100 psi spec after the part cools.

Does the 1 lb spool of black Alloy 910 include a desiccant pack or must I buy one separately?

The box contains only the filament spool; a desiccant pack and any drying equipment are separate purchases.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.