Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 2.85 mm filament spool, matte finish, one pound net weight

Taulman 3D

Taulman 3D Alloy 910 Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-V02P-ZTB31

High-performance nylon-based filament prints at 250–255 °C with 8,100 PSI tensile strength and 32 % elongation

  • ColorBlack
  • TypeFilament
  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Material and format

Taulman 3D Alloy 910 is a high-performance nylon-based filament supplied on a 1 lb spool in black. It has a 2.85 mm diameter and prints at 250°C to 255°C with a bed temperature of 30°C to 65°C.

Who it suits and who it does not

Professionals in aerospace, automotive, agriculture, healthcare, product design and general engineering will value the 8,100 psi tensile strength and 32% elongation for strong, stiff parts. Printers limited to lower nozzle temperatures or without a heated bed cannot process this material.

Deciding specification

The 95°C working temperature range defines the operational envelope for printed components. Buyers needing parts that withstand higher continuous heat must select a different polymer.

Privalumai

  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Specifikacijos

Brandtaulman3d
ColorBlack
TypeFilament

Klausimai apie šią prekę

Will the 2.85 mm Alloy 910 filament feed reliably through a Bowden extruder designed for 2.85 mm stock?

Yes — the filament diameter is 2.85 mm, so it matches extruders built for that size.

How can I confirm the Alloy 910 is printing correctly at the recommended 250-255 °C nozzle and 30-65 °C bed temperatures?

Look for strong layer adhesion, minimal warping, and a tensile feel consistent with the 8100 psi spec after the part cools.

Does the 1 lb spool of black Alloy 910 include a desiccant pack or must I buy one separately?

The box contains only the filament spool; a desiccant pack and any drying equipment are separate purchases.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.