Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 2.85 mm filament spool, matte finish, one pound net weight

Taulman 3D

Taulman 3D Alloy 910 Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-V02P-ZTB31

High-performance nylon-based filament prints at 250–255 °C with 8,100 PSI tensile strength and 32 % elongation

  • ColorBlack
  • TypeFilament
  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Material and format

Taulman 3D Alloy 910 is a high-performance nylon-based filament supplied on a 1 lb spool in black. It has a 2.85 mm diameter and prints at 250°C to 255°C with a bed temperature of 30°C to 65°C.

Who it suits and who it does not

Professionals in aerospace, automotive, agriculture, healthcare, product design and general engineering will value the 8,100 psi tensile strength and 32% elongation for strong, stiff parts. Printers limited to lower nozzle temperatures or without a heated bed cannot process this material.

Deciding specification

The 95°C working temperature range defines the operational envelope for printed components. Buyers needing parts that withstand higher continuous heat must select a different polymer.

Helstu kostir

  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Tæknilýsing

Brandtaulman3d
ColorBlack
TypeFilament

Spurningar um þessa vöru

Will the 2.85 mm Alloy 910 filament feed reliably through a Bowden extruder designed for 2.85 mm stock?

Yes — the filament diameter is 2.85 mm, so it matches extruders built for that size.

How can I confirm the Alloy 910 is printing correctly at the recommended 250-255 °C nozzle and 30-65 °C bed temperatures?

Look for strong layer adhesion, minimal warping, and a tensile feel consistent with the 8100 psi spec after the part cools.

Does the 1 lb spool of black Alloy 910 include a desiccant pack or must I buy one separately?

The box contains only the filament spool; a desiccant pack and any drying equipment are separate purchases.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.