저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 2.85 mm filament spool, matte finish, one pound net weight

Taulman 3D

Taulman 3D Alloy 910 Filament 2.85mm 1lb Black 3d printers accessory

SKU CH-V02P-ZTB31

High-performance nylon-based filament prints at 250–255 °C with 8,100 PSI tensile strength and 32 % elongation

  • ColorBlack
  • TypeFilament
  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

Material and format

Taulman 3D Alloy 910 is a high-performance nylon-based filament supplied on a 1 lb spool in black. It has a 2.85 mm diameter and prints at 250°C to 255°C with a bed temperature of 30°C to 65°C.

Who it suits and who it does not

Professionals in aerospace, automotive, agriculture, healthcare, product design and general engineering will value the 8,100 psi tensile strength and 32% elongation for strong, stiff parts. Printers limited to lower nozzle temperatures or without a heated bed cannot process this material.

Deciding specification

The 95°C working temperature range defines the operational envelope for printed components. Buyers needing parts that withstand higher continuous heat must select a different polymer.

주요 특징

  • High tensile strength of 8100 PSI for durable parts
  • 32% elongation absorbs impact without snapping
  • Prints at 250 to 255C on beds from 30 to 65C
  • 85mm diameter fits compatible 3D printers
  • Nylon-based polymer eases support removal versus ABS

사양

Brandtaulman3d
ColorBlack
TypeFilament

이 상품에 대한 질문

Will the 2.85 mm Alloy 910 filament feed reliably through a Bowden extruder designed for 2.85 mm stock?

Yes — the filament diameter is 2.85 mm, so it matches extruders built for that size.

How can I confirm the Alloy 910 is printing correctly at the recommended 250-255 °C nozzle and 30-65 °C bed temperatures?

Look for strong layer adhesion, minimal warping, and a tensile feel consistent with the 8100 psi spec after the part cools.

Does the 1 lb spool of black Alloy 910 include a desiccant pack or must I buy one separately?

The box contains only the filament spool; a desiccant pack and any drying equipment are separate purchases.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.