Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Thermaltake
A 120 mm PWM case fan running 500 to 2500 RPM for 72.69 CFM airflow at 28.1 dBA
Model 2500 RPM
Option 1 Pack, 120mm
The Thermaltake ToughFan 12 Turbo is a 120 mm fan built for case or radiator mounting. It uses a 4-pin PWM connector to vary speed between 500 and 2500 RPM. Grey liquid crystal polymer blades and a metal-reinforced motor hub aim to reduce vibration at high speed. The Gen.2 hydraulic bearing is designed for lower noise and longer life.
The fan’s PWM interface lets the motherboard command any speed from 500 to 2500 RPM, but the curve is defined by the board’s firmware, not the fan. At the top speed it delivers 72.69 CFM and 3.78 mm-H2O static pressure, with a rated noise of 28.1 dBA. Below the minimum PWM duty the fan may stop or run at a fixed floor speed depending on the header implementation.
Verify that your motherboard or fan controller can supply enough current for the 4-pin PWM header; some dense header clusters share a single rail. The frame measures 120.00 x 120.00 x 25.00 mm, so confirm that your case or radiator has 25 mm depth clearance and standard 120 mm screw spacing. Anti-vibration mounts are included but add a few millimetres to the overall thickness.
| Brand | Thermaltake |
|---|---|
| Model | CL-F121-PL12GM-A |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 ~ 2500 R.P.M |
| Air Flow | 72.69 CFM |
| Noise Level | 28.1 dBA |
| Power Connector | 4 PIN PWM |
| Color | Black |
| Features | Superb Cooling Performance at 2500 RPM Exceptional Grey Fan Blades Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing High Air Pressure and High Airflow Hydraulic Bearing with Low-Noise Design Anti-Vibration Mounting System |
| Dimensions | 120.00 x 120.00 x 25.00mm |
| Tarnekaal | 0.32 kg |
| Pakendi mõõtmed | 191 × 138 × 32 mm |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The Turbo reaches 2500 RPM and 72.69 CFM with 3.78 mm-H2O pressure, while the standard TOUGHFAN 12 tops out at 2000 RPM, 58.35 CFM and 2.41 mm-H2O.
At full speed the fan moves 72.69 cubic feet of air per minute through an unrestricted opening; inside a case the actual flow will be lower due to grille, filter and component resistance.
The motherboard can vary the fan between 500 and 2500 RPM through the 4-pin PWM header, so the 72.69 CFM and 28.1 dBA figures are only reached at the maximum duty cycle.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Ükski keel ei vasta.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?