Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Thermaltake
A 120 mm PWM case fan running 500 to 2500 RPM for 72.69 CFM airflow at 28.1 dBA
Model 2500 RPM
Option 1 Pack, 120mm
The Thermaltake ToughFan 12 Turbo is a 120 mm fan built for case or radiator mounting. It uses a 4-pin PWM connector to vary speed between 500 and 2500 RPM. Grey liquid crystal polymer blades and a metal-reinforced motor hub aim to reduce vibration at high speed. The Gen.2 hydraulic bearing is designed for lower noise and longer life.
The fan’s PWM interface lets the motherboard command any speed from 500 to 2500 RPM, but the curve is defined by the board’s firmware, not the fan. At the top speed it delivers 72.69 CFM and 3.78 mm-H2O static pressure, with a rated noise of 28.1 dBA. Below the minimum PWM duty the fan may stop or run at a fixed floor speed depending on the header implementation.
Verify that your motherboard or fan controller can supply enough current for the 4-pin PWM header; some dense header clusters share a single rail. The frame measures 120.00 x 120.00 x 25.00 mm, so confirm that your case or radiator has 25 mm depth clearance and standard 120 mm screw spacing. Anti-vibration mounts are included but add a few millimetres to the overall thickness.
| Brand | Thermaltake |
|---|---|
| Model | CL-F121-PL12GM-A |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 ~ 2500 R.P.M |
| Air Flow | 72.69 CFM |
| Noise Level | 28.1 dBA |
| Power Connector | 4 PIN PWM |
| Color | Black |
| Features | Superb Cooling Performance at 2500 RPM Exceptional Grey Fan Blades Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing High Air Pressure and High Airflow Hydraulic Bearing with Low-Noise Design Anti-Vibration Mounting System |
| Dimensions | 120.00 x 120.00 x 25.00mm |
| Sūtījuma svars | 0.32 kg |
| Sūtījuma izmēri | 191 × 138 × 32 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The Turbo reaches 2500 RPM and 72.69 CFM with 3.78 mm-H2O pressure, while the standard TOUGHFAN 12 tops out at 2000 RPM, 58.35 CFM and 2.41 mm-H2O.
At full speed the fan moves 72.69 cubic feet of air per minute through an unrestricted opening; inside a case the actual flow will be lower due to grille, filter and component resistance.
The motherboard can vary the fan between 500 and 2500 RPM through the 4-pin PWM header, so the 72.69 CFM and 28.1 dBA figures are only reached at the maximum duty cycle.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?