Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Thermaltake
A 120 mm PWM case fan running 500 to 2500 RPM for 72.69 CFM airflow at 28.1 dBA
Model 2500 RPM
Option 1 Pack, 120mm
The Thermaltake ToughFan 12 Turbo is a 120 mm fan built for case or radiator mounting. It uses a 4-pin PWM connector to vary speed between 500 and 2500 RPM. Grey liquid crystal polymer blades and a metal-reinforced motor hub aim to reduce vibration at high speed. The Gen.2 hydraulic bearing is designed for lower noise and longer life.
The fan’s PWM interface lets the motherboard command any speed from 500 to 2500 RPM, but the curve is defined by the board’s firmware, not the fan. At the top speed it delivers 72.69 CFM and 3.78 mm-H2O static pressure, with a rated noise of 28.1 dBA. Below the minimum PWM duty the fan may stop or run at a fixed floor speed depending on the header implementation.
Verify that your motherboard or fan controller can supply enough current for the 4-pin PWM header; some dense header clusters share a single rail. The frame measures 120.00 x 120.00 x 25.00 mm, so confirm that your case or radiator has 25 mm depth clearance and standard 120 mm screw spacing. Anti-vibration mounts are included but add a few millimetres to the overall thickness.
| Brand | Thermaltake |
|---|---|
| Model | CL-F121-PL12GM-A |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 ~ 2500 R.P.M |
| Air Flow | 72.69 CFM |
| Noise Level | 28.1 dBA |
| Power Connector | 4 PIN PWM |
| Color | Black |
| Features | Superb Cooling Performance at 2500 RPM Exceptional Grey Fan Blades Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing High Air Pressure and High Airflow Hydraulic Bearing with Low-Noise Design Anti-Vibration Mounting System |
| Dimensions | 120.00 x 120.00 x 25.00mm |
| Přepravní hmotnost | 0.32 kg |
| Rozměry balení | 191 × 138 × 32 mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The Turbo reaches 2500 RPM and 72.69 CFM with 3.78 mm-H2O pressure, while the standard TOUGHFAN 12 tops out at 2000 RPM, 58.35 CFM and 2.41 mm-H2O.
At full speed the fan moves 72.69 cubic feet of air per minute through an unrestricted opening; inside a case the actual flow will be lower due to grille, filter and component resistance.
The motherboard can vary the fan between 500 and 2500 RPM through the 4-pin PWM header, so the 72.69 CFM and 28.1 dBA figures are only reached at the maximum duty cycle.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?