Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White 120 mm square case fan with white blades and frame, 25 mm thick, 4-pin PWM connector

Thermaltake

Thermaltake CL-F117-PL12WT-A 120mm case fan 2000 RPM white

SKU CH-79EV-P81WZ MPN CL-F117-PL12WT-A

A 120 mm white PWM case fan spinning 500 to 2000 RPM, delivering 58.35 CFM at 22.3 dBA with a Gen.2 hydraulic bearing and metal-reinforced hub

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing Gen.2

Color White

Model 2000 RPM

Option 1 Pack, 120mm

  • High static pressure 58.35 CFM for dense radiators
  • Quiet 22.3 dBA at 2000 RPM max speed
  • Gen.2 hydraulic bearing for long life
  • LCP blades cut vibration and boost stability
  • Metal-reinforced hub keeps rotation precise

White 120 mm PWM fan for case or radiator

The Thermaltake CL-F117-PL12WT-A is a single 120 mm case fan built for systems that need focused airflow through restrictive fins. Its white frame and blades suit colour-coordinated builds without adding lighting complexity.

58.35 CFM at 2000 RPM with hydraulic bearing

The Gen.2 hydraulic bearing spins from 500 to 2000 RPM, delivering 58.35 CFM peak airflow for dense radiators or tight mesh panels. Headroom drops when static pressure demands exceed the curve, so very thick radiators or multi-fan stacks may need higher-spec units.

22.3 dBA at full speed with metal-reinforced hub

At maximum RPM the fan measures 22.3 dBA, keeping acoustic output low for a 2000 RPM design. The metal-reinforced motor hub and LCP blades reduce vibration, while the 4-pin PWM connector lets the motherboard scale speed to thermal load.

Přednosti

  • High static pressure 58.35 CFM for dense radiators
  • Quiet 22.3 dBA at 2000 RPM max speed
  • Gen.2 hydraulic bearing for long life
  • LCP blades cut vibration and boost stability
  • Metal-reinforced hub keeps rotation precise

Specifikace

BrandThermalright
ModelCL-F117-PL12WT-A
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic Bearing Gen.2
RPM500 ~2000 R.P.M
Air Flow58.35 CFM
Noise Level22.3 dBA
Power Connector4 Pin
ColorWhite
FeaturesPWM Controlled Fan with maximum speed of 2000 RPM.
Low-Noise 2nd generation Hydraulic Bearing.
Made from LCP material to reduce the vibration and improve the stability.
Used metal-reinforced motor hub to ensure the superb precision.
Dimensions120.00 x 120.00 x 25.00 mm
Přepravní hmotnost0.32 kg
Rozměry balení191 × 140 × 33 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 4-pin PWM connector on this 2000 RPM fan work with my older motherboard that only has 3-pin headers?

Yes, the 4-pin plug fits a 3-pin header; the fan will run at full 2000 RPM constantly because PWM control is unavailable on the older header.

How can I confirm the hydraulic bearing Gen.2 is running at the rated 22.3 dBA after installation?

Use motherboard software or a hardware monitor to verify the fan idles near 500 RPM; at that speed the published noise figure is 22.3 dBA.

Does the single pack include mounting screws for a standard 120 mm case opening, or must I buy them separately?

The box contains the 120 mm fan only; four mounting screws for 120 mm holes are not included and must be purchased separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.