Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 128GB (4x32GB) DDR4 2400 ECC LRDIMM 4Rx4 memory upgrade

SKU CH-NT5Z-2R8CE

128 GB kit of four 32 GB DDR4 2400 ECC LRDIMM modules for Dell PowerEdge 13th Gen rack servers

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Speed DDR4 2400 (PC4 19200)

  • 128GB total capacity across four 32GB modules
  • ECC Load Reduced DIMM detects and corrects data errors
  • 2400MHz DDR4 speed with CL17 latency
  • 20V operation reduces power draw
  • Compatible with Dell PowerEdge 13th Gen rack servers

128GB DDR4 ECC LRDIMM kit for 13th Gen PowerEdge

This 128GB kit contains four 32GB DDR4 2400 ECC load-reduced DIMMs built for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830 and R930 rack servers. It targets administrators who need maximum registered capacity on these 13th Gen platforms. The modules are not compatible with desktop or laptop systems that require non-ECC unbuffered memory.

Tool-free DIMM installation

Each 288-pin module seats in the standard DDR4 slots without tools, but the server manual dictates exact channel and slot order for quad-rank LRDIMMs. Mixing LRDIMMs with registered DIMMs is not supported; all installed modules must share the same ECC type. Speeds can be mixed, yet the system will clock down to the slowest module present.

Steady 1.20V operation under continuous load

The kit runs at 1.20V with CL17 latency, maintaining the rated 2400 MT/s throughput during sustained workloads such as virtualisation or database services. Load-reduced buffering reduces electrical load on the memory controller, helping stability when all channels are fully populated. No heat spreader is fitted, so adequate chassis airflow is required for prolonged operation.

Kohokohdat

  • 128GB total capacity across four 32GB modules
  • ECC Load Reduced DIMM detects and corrects data errors
  • 2400MHz DDR4 speed with CL17 latency
  • 20V operation reduces power draw
  • Compatible with Dell PowerEdge 13th Gen rack servers

Tekniset tiedot

BrandA-Tech
Series13th Gen Dell PowerEdge Rack Server Compatible
Model128GB (4x32GB) 4Rx4 DDR4-2400 LRDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Part NumberNE-MS-0026
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 / 4DRx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers
OptionCompatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
FeaturesDesigned for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930
Package ContentFour Modules

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the 128GB kit is running at DDR4 2400 with ECC LRDIMM after installing it in a PowerEdge R730?

Check the BIOS memory configuration or run the Dell System E-Support Tool; it will report 2400MHz speed, CL17 latency, 1.20V voltage, 4Rx4 rank and ECC Load Reduced status for each of the four 32GB modules.

What ships with the NE-MS-0026 kit and what else is required to reach 128GB in a Dell PowerEdge R630?

The box contains four 32GB 288-pin DDR4 LRDIMM modules — nothing else is needed to populate four slots for the full 128GB capacity.

Which version should I choose for a PowerEdge R930 that already has ECC Registered DIMMs installed?

Do not mix ECC Load Reduced with ECC Registered; select this 4Rx4 LRDIMM kit only if you will replace all existing modules so every slot uses matching Load Reduced memory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.