Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 128GB DDR4 2666 ECC LRDIMM CL19 1.2V Server Memory

SKU CH-6GAM-P0XNR

A 128 GB DDR4 2666 ECC load-reduced DIMM with CL19 latency and 1.2 V operation for server and workstation upgrades

  • Capacity128GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 128GB capacity handles heavy server workloads
  • DDR4 2666MHz speed delivers PC4-21300 bandwidth
  • ECC LRDIMM design protects data integrity
  • CL19 latency at 1.2V standard voltage
  • 288-pin LRDIMM fits compatible HP L22096-001 systems

Capacity and compatibility

This 128 GB DDR4 module targets server and workstation administrators who need a single high-density stick to expand memory capacity in supported HP platforms. The part is built as a direct replacement for the HP L22096-001 specification.

Upgrade path

It replaces lower-capacity DDR4 LRDIMMs when the system’s memory controller and BIOS support 8Rx4 3DS/TSV organisation at 2666 MHz. The jump is worthwhile when workloads demand more than the current installed total and the platform qualifies this exact part number.

Installation notes

The 288-pin DIMM seats in standard DDR4 slots, but the 262-pin form-factor notation in the supplier data means installers must confirm the physical keying matches their chassis. Misalignment or mixing ranks across channels are the most common causes of a failed POST.

Kohokohdat

  • 128GB capacity handles heavy server workloads
  • DDR4 2666MHz speed delivers PC4-21300 bandwidth
  • ECC LRDIMM design protects data integrity
  • CL19 latency at 1.2V standard voltage
  • 288-pin LRDIMM fits compatible HP L22096-001 systems

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL22096-001
Capacity128GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4)
ChipsetMajor Brand Chipset
FeaturesL22096-001

Kysymyksiä tästä tuotteesta

Will this 288-pin DDR4 LRDIMM fit my server's memory slots?

The module uses the standard 288-pin DDR4 DIMM form factor; verify your platform supports DDR4 2666 LRDIMMs before installing.

What is the correct way to seat this 128GB LRDIMM, and what step do people often miss?

Align the notch with the slot key, press firmly until both side clips click, and ensure the 1.2V DDR4 voltage matches your system configuration.

When will this ECC LRDIMM need replacement or maintenance?

No scheduled maintenance is required; the module is tested for reliability and covered by a lifetime warranty for the duration of its service life.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.