Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 ECC RDIMM modules with gold contacts

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC RDIMM Mac Pro 2010/2012 memory upgrade

SKU CH-YETJ-K5JT1

16 GB DDR3 1333 ECC registered kit upgrades Mid 2010 and Mid 2012 Mac Pro towers

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor Brand Chipset
  • 16 GB kit (2 × 8 GB) doubles Mac Pro memory capacity
  • DDR3 1333 MHz PC3-10600 matches factory speed spec
  • ECC registered RDIMM protects data integrity on Xeon workstations
  • Validated for Mac Pro 2010 and 2012 6-core and 12-core models
  • Major-brand chips tested to strict quality standards

Mac Pro 2010/2012 16GB ECC kit

This 16GB kit contains two 8GB DDR3 1333 ECC RDIMM modules built for the Mac Pro Mid 2010 and Mid 2012 models with 6-Core or 12-Core Xeon processors. The registered 240-pin DIMMs run at 1.50V and carry major-brand chips validated for Apple order numbers MD771LL/A and model ID MacPro5,1. Installation adds 16GB of error-correcting memory to the four-slot or eight-slot risers in those towers.

Suits owners of compatible Mac Pro towers

The kit is intended for users upgrading a Mac Pro Mid 2010 (6-Core or 12-Core) or Mid 2012 (6-Core or 12-Core) that accepts DDR3 1333 ECC registered memory. It will not fit Mac Pro models that use a different memory generation or form factor, nor standard desktop boards that require unbuffered non-ECC DIMMs. Builders needing higher capacity per module or a different voltage should look elsewhere.

DDR3 1333 ECC RDIMM 240-pin specification

The decisive specification is the DDR3 1333 (PC3-10600) ECC registered 240-pin RDIMM format. Only systems listed as compatible — MacPro5,1 with Xeon E5645, X5650, X5675, X5670 or W3680 processors — will recognise and run this kit at the rated speed and voltage. Any other platform lacking DDR3 ECC RDIMM support cannot use these modules.

Kohokohdat

  • 16 GB kit (2 × 8 GB) doubles Mac Pro memory capacity
  • DDR3 1333 MHz PC3-10600 matches factory speed spec
  • ECC registered RDIMM protects data integrity on Xeon workstations
  • Validated for Mac Pro 2010 and 2012 6-core and 12-core models
  • Major-brand chips tested to strict quality standards

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How can I confirm the 16GB DDR3 1333 ECC RDIMM kit is running correctly after installation in my Mac Pro?

Open About This Mac to verify 16GB appears, then run Apple Hardware Test or Apple Diagnostics for a full memory check.

What comes in the box and do I need anything else to install the 2x8GB 240-pin modules?

The kit includes two 8GB DDR3 1333 ECC registered DIMMs; no extra parts or tools are required for the Mac Pro memory bays.

Which capacity should I choose between the 16GB kit and other sizes for a Mac Pro 5,1 with Xeon 2.4 or 3.33GHz CPUs?

This 16GB (2x8GB) kit matches the qualified MD771LL/A configuration and works with all listed Xeon processors for those models.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.