Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 ECC RDIMM sticks with gold contacts and black chips

A-Tech

A-Tech 16GB (2x8GB) DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V server RAM

SKU CH-3MPY-RKDPQ

ECC-registered dual-channel kit adds 16 GB of DDR4 2400 memory with CL17 latency at 1.2 V for servers and workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit expands server capacity
  • DDR4 2400 MHz CL17 speeds up data throughput
  • ECC registered DIMM protects data integrity
  • 2 V standard voltage reduces power draw
  • 288-pin single-rank modules fit DDR4 server slots

Server memory kit for DDR4 workstations

This 16 GB kit contains two 8 GB DDR4 2400 registered DIMMs with ECC and a CAS latency of CL17 at 1.2 V. It is built for servers and workstations that require registered memory and will not function in standard desktop or laptop platforms. The dual-channel configuration helps improve throughput for multi-threaded workloads.

Upgrading from non-ECC or slower DDR4 modules

Replacing unbuffered or lower-speed memory with these registered ECC DIMMs adds error correction and signal integrity for mission-critical tasks. The jump is worthwhile when your platform supports registered memory and you need data integrity for virtualisation, databases or compute clusters.

Suits IT professionals managing qualified server

Buyers who need registered DDR4 ECC memory for a compatible 288-pin platform will benefit from the validated dual-channel kit. Those whose systems require unbuffered DIMMs, laptop SO-DIMMs, or a different DDR generation should look at other memory types.

Kohokohdat

  • 16 GB dual-channel kit expands server capacity
  • DDR4 2400 MHz CL17 speeds up data throughput
  • ECC registered DIMM protects data integrity
  • 2 V standard voltage reduces power draw
  • 288-pin single-rank modules fit DDR4 server slots

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx8 PC4-2400T-R
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What slot type and pin count does this DDR4 RDIMM kit require on the motherboard?

The modules use the standard DDR4 DIMM form factor with 288 pins and must be installed in registered DIMM slots that support ECC RDIMM memory.

Which population order should I follow when installing the two 8 GB sticks for dual-channel operation?

Consult the server or workstation manual for the correct slot sequence; the kit is a dual-channel pair of single-rank 1Rx8 modules that must be seated in the designated channels to run at 2400 MHz CL17.

Do these registered ECC modules need any firmware updates or periodic re-seating to maintain stability?

No firmware updates are required for the memory itself; stability is maintained by the motherboard memory controller, and the 1.2 V modules only need re-seating if the system is moved or shows memory errors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.