Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 16GB (2x8GB) DDR4 2400 ECC SODIMM CL17 1.2V 2Rx8 Kit

SKU CH-PVY6-3EB8B

Dual-channel 16 GB DDR4 ECC SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 16GB (2 x 8GB)

CAS Latency CL17

  • 16 GB dual-channel kit for higher multitasking capacity
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC unbuffered SODIMM detects and corrects single-bit errors
  • 2 V JEDEC standard voltage reduces power draw
  • 260-pin 2Rx8 modules fit compatible laptop and microserver slots

16 GB DDR4 ECC SODIMM kit

This 16 GB kit contains two 8 GB DDR4 ECC SODIMM modules built for systems that require error-correcting memory. It targets administrators upgrading microservers, mobile workstations and NAS servers that support unbuffered ECC SO-DIMMs.

Capacity and headroom

The 16 GB total capacity handles typical virtualization workloads, file-serving duties and moderate database tasks on supported platforms. Systems needing more than 16 GB or faster memory speeds will require higher-density or higher-frequency modules.

ECC unbuffered DDR4 2400

These modules run at DDR4 2400 with CL17 latency at the standard 1.2 V. The dual-rank 2Rx8 organisation and 260-pin SO-DIMM form factor mean they only work in platforms that explicitly support unbuffered ECC SODIMM memory.

Kohokohdat

  • 16 GB dual-channel kit for higher multitasking capacity
  • DDR4 2400 speed with CL17 latency for responsive data access
  • ECC unbuffered SODIMM detects and corrects single-bit errors
  • 2 V JEDEC standard voltage reduces power draw
  • 260-pin 2Rx8 modules fit compatible laptop and microserver slots

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 2Rx8 PC4-19200 ECC SODIMM
Part NumberNE-SS-0601
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these DDR4 2400 ECC SODIMMs work in a laptop that currently has DDR4 2400 non-ECC modules?

These are DDR4 2400 ECC unbuffered SODIMMs. Mixing ECC and non-ECC modules is not recommended because the system will typically disable ECC functionality or fail to boot. For reliable operation, populate all slots with matching ECC modules.

How can I confirm the kit is running at 2400 MHz with CL17 timings after installation?

Open Task Manager or a tool like CPU-Z and check the memory tab. You should see the speed reported as 2400 MHz and the CAS latency as CL17. The SPD will also show PC4-19200 and 1.20V operation.

Does the 16GB kit include two 8GB modules and nothing else?

The kit contains two 8GB DDR4 2400 ECC SODIMM modules (2Rx8, 260-pin) for a total of 16GB. No heat spreaders, screws, or additional accessories are included in the package.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.