Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips, registered ECC server memory

A-Tech

A-Tech 16GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server RAM

SKU CH-SZDJ-78FQB

A 16 GB DDR3 registered ECC DIMM running at 1333 MHz with CL9 latency and 1.5 V for server workloads

  • Capacity16GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects single-bit errors
  • 2Rx4 dual-rank organisation fits standard 240-pin DIMM slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

16GB DDR3 ECC RDIMM module

This 16GB DDR3 registered DIMM delivers ECC error correction for server and workstation platforms. It operates at 1333MHz with a CL9 latency and standard 1.5V voltage. The 2Rx4 organisation uses major brand chips across a single 240-pin module.

Verify registered DIMM support and voltage

Confirm your motherboard accepts registered ECC memory before ordering, as unbuffered slots will not work with this module. The system must also support 1.5V DDR3 operation and provide a 240-pin DIMM slot. Check the qualified vendor list for 16GB density compatibility.

Steady throughput under sustained load

Registered buffering reduces electrical loading on the memory controller during continuous multi-threaded workloads. ECC correction maintains data integrity across extended compute sessions without the errors that can accumulate in non-ECC configurations. The CL9 timing provides consistent latency for predictable server response.

Kohokohdat

  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects single-bit errors
  • 2Rx4 dual-rank organisation fits standard 240-pin DIMM slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Does the package contain only the single 16GB DDR3 1333MHz ECC RDIMM module or are additional parts included?

The package contains one 16GB DDR3 1333MHz PC3-10600 ECC RDIMM module with 240 pins. No extra cables, brackets or cooling parts are included.

Should I choose this 16GB 2Rx4 CL9 1.50V registered module or a different capacity or rank for my server?

Select this 16GB 2Rx4 CL9 1.50V registered module when your server requires a single DDR3 1333MHz ECC RDIMM of that exact density and rank. Match the rank and voltage to your system's qualified memory list.

What does the 1333MHz PC3-10600 rating mean for actual throughput once the module is installed in a compatible server?

The 1333MHz PC3-10600 rating indicates a peak transfer rate of 10600 MB/s at CL9 latency when the server's memory controller runs the module at its rated DDR3 1333 speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.