Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DDR3 registered DIMM

A-Tech

A-Tech 16GB DDR3 1866 ECC RDIMM 2Rx4 Server RAM

SKU CH-GN4Q-FGW3B

16 GB DDR3 1866 ECC registered DIMM with 2Rx4 organisation and CL13 latency

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3 1866 MHz boosts server throughput
  • ECC registered design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation increases memory density per slot
  • CL13 latency at 1.5 V standard voltage keeps power draw low
  • 240-pin DIMM form factor fits compatible DDR3 server boards

DDR3 1866 ECC RDIMM 16GB Server Module

This A-Tech module delivers 16GB of DDR3 1866 registered ECC memory in a single 240-pin DIMM. It runs at 1.50V with CL13 latency and uses a 2Rx4 organisation built on major-brand chips. The specification matches Hynix part numbers HMT42GR7AFR4C-RD, HMT42GR7BFR4C-RD, HMT42GR7DFR4C-RD and HMT82GV7AMR4C-RD for direct replacement in compatible servers and workstations.

Suited for DDR3 Registered ECC Platforms Only

Administrators upgrading or repairing servers that require DDR3 1866 registered ECC DIMMs will find the correct form factor, voltage and error-correction here. Systems that accept only unbuffered non-ECC modules, or platforms that have moved to later DDR generations, cannot use this module and need a different memory type.

Registered ECC With 2Rx4 Organisation Is Mandatory

The motherboard and memory controller must support registered ECC DIMMs with a 2Rx4 rank configuration at DDR3 1866 speed. If the platform requires unbuffered memory, non-ECC operation, a different rank layout or another DDR generation, this module will not function.

Kohokohdat

  • 16 GB DDR3 1866 MHz boosts server throughput
  • ECC registered design corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation increases memory density per slot
  • CL13 latency at 1.5 V standard voltage keeps power draw low
  • 240-pin DIMM form factor fits compatible DDR3 server boards

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Does this 16GB DDR3 1866 module need a 240-pin DIMM slot?

Yes, the module uses the standard DDR3 DIMM form factor with 240 pins and requires a matching registered DIMM slot on the server or workstation motherboard.

What is the correct way to seat this registered ECC RDIMM, and what step do people often miss?

Align the notch with the slot key, press down firmly until both side clips click, and verify the system recognises the full 16GB at 1866 MHz; the common miss is not pressing hard enough to engage both clips.

Will this 1.5V DDR3 1866 RDIMM need any firmware updates or component swaps over its service life?

No firmware updates are required for the memory itself; the module is a solid-state component with no moving parts, so it only needs replacement if a memory test reports errors or the system fails to POST.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.