A-Tech 16GB (4x4GB) DDR3 1600MHz CL11 240-Pin Desktop RAM
- 16GB (4 x 4GB)
- 240-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 16GB dual-channel DDR3 kit running at 1866MHz with CL13 timing and 1.5V operation for desktop upgrades
Capacity 16GB (2 x 8GB)
Speed DDR3 1866 (PC3 14900)
This A-Tech kit supplies 16GB of DDR3 memory across two 8GB modules. It is built for desktop computers that accept 240-pin DIMMs and runs at 1866MHz with CL13 timing. The 1.5V voltage matches standard DDR3 requirements for compatible AMD and Intel platforms.
Before ordering, confirm your motherboard supports DDR3 DIMMs at 1866MHz and has two free 240-pin slots for dual-channel operation. Check the vendor’s qualified vendor list or manual for the exact speed and voltage compatibility. The kit is non-ECC and unbuffered, so it will not work in systems that require registered or ECC memory.
The modules operate at the standard 1.5V without a heat spreader, so they rely on case airflow for cooling. Under typical desktop workloads power draw stays within normal DDR3 limits and the memory runs silently. Ensure your chassis provides adequate ventilation around the DIMM slots to maintain stable temperatures.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Desktop Memory RAM |
| Model | A-Tech 16GB Kit (2x8GB) PC3-14900 Desktop RAM |
| Part Number | NE-SS-0656 |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin PC RAM |
| Speed | DDR3 1866 (PC3 14900) |
| Tested Frequency | 1866 |
| Tested Timing | 13 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit uses standard 240-pin DDR3 DIMMs at 1.5 V and runs at 1866 MHz with CL13 timing; if your board supports DDR3 1866/1867 and unbuffered non-ECC memory, the modules will fit and function.
Most DDR3 boards default to a lower JEDEC speed; enter the BIOS and set the memory frequency to 1866 MHz (PC3-14900) with timings of 13-13-13 at 1.5 V to match the tested specification.
This is a matched dual-channel pair (2 x 8 GB); adding a second kit of identical spec can work but may require manual timing adjustment and is not guaranteed to run at 1866 MHz on every platform.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?