NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16 GB DDR3L 1333 ECC registered server DIMM with 2Rx4 organisation, 1.35 V operation and 240-pin form factor for Dell systems
This 16GB A-Tech DDR3L module runs at 1333MHz with CL9 latency and a low 1.35V operating voltage. It is built as a registered ECC RDIMM using a 2Rx4 configuration on a 240-pin form factor. The stick is designed for Dell servers and workstations that require registered error-correcting memory.
The DDR3L low-voltage design reduces power consumption compared to standard 1.5V DDR3 modules during normal operation. Lower voltage typically results in reduced heat output, which helps maintain stable temperatures inside dense server chassis. Registered buffering adds minimal electrical load to the memory controller.
The module replaces Dell part numbers including A5008568, A5180173, A5816808, A6199967, A7130581, SNPHMNTFC/16G, SNPHMNTGC/16G, SNPMGY5TC/16GWS and SNPYXKF8C/16G. Major-brand chips undergo quality assurance testing to ensure dependable performance in supported systems. Buyers needing unbuffered UDIMMs or non-ECC memory for desktop platforms cannot use this registered server module.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the single off-centre notch on the 240-pin module with the slot key, press straight down until both side clips click, and ensure the 1.35V DDR3L module seats fully in a DDR3L-capable server slot.
No routine maintenance is required; the module either passes POST or it does not, so replacement only occurs if a memory error appears or capacity needs increase.
The 1333MHz CL9 registered ECC bandwidth ceiling appears first when total memory throughput exceeds the PC3L-10600 data rate during heavy multi-threaded tasks.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?