NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16GB DDR3L 1333 ECC registered server DIMM with 2Rx4 layout and 1.35V low voltage
This 16GB DDR3L 1333MHz registered DIMM delivers error-correcting memory for server and workstation platforms. It operates at 1.35V low voltage with CL9 latency and uses a 2Rx4 organisation on a 240-pin interface. The module replaces specific Hynix part numbers and undergoes quality assurance testing for dependable operation.
This memory fits systems that require DDR3L ECC registered DIMMs and accept 1.35V modules at 1333MHz. It will not work in platforms that need unbuffered UDIMMs, non-ECC memory, standard 1.5V DDR3, or different DDR generations. Builders without registered ECC support should look at other memory types.
The 1x16GB configuration occupies one registered DIMM slot, leaving other slots available for further capacity expansion within the platform limits. The low-voltage DDR3L design reduces power draw per module compared to standard DDR3. Verify your system's qualified vendor list and maximum supported capacity before installation.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module is a DDR3L 1333 (PC3L-10600) ECC RDIMM that requires a 240-pin registered DDR3L slot supporting 1.35V operation.
No, registered and unbuffered DIMMs cannot be mixed; the motherboard must support registered memory and all populated slots should use registered modules.
Check the BIOS memory information or run a tool such as dmidecode to verify speed shows 1333 MT/s, voltage reads 1.35V, and ECC status reports enabled.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?