Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 for Synology RAMRG2133DDR4-16G Server Memory

SKU CH-0FQQ-1QY2H

16 GB DDR4 2133 ECC RDIMM 2Rx4 server memory module with 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity expands server memory for heavier workloads
  • DDR4 2133MHz speed with CL15 latency supports responsive data access
  • ECC RDIMM registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation increases memory density per module
  • 2V standard voltage reduces power draw in compatible systems

Synology-Compatible DDR4 ECC RDIMM

This 16 GB registered DDR4 module is built as a direct replacement for the Synology RAMRG2133DDR4-16G part number. It targets administrators upgrading compatible Synology NAS units or workstations that require ECC registered memory. The single-module design simplifies installation when only one slot is available or when populating channels evenly.

16 GB Capacity with CL15 Latency

The module runs at 2133 MHz (PC4-17000) with a CAS latency of 15 and operates at the standard 1.20 V. ECC and registered buffering provide error correction and signal integrity for multi-module server configurations. Capacity heads-up is reached when the platform's maximum supported memory per slot or total system limit is met.

288-Pin DIMM for Registered Platforms

The 288-pin DDR4 DIMM form factor fits only motherboards and NAS appliances designed for registered ECC memory. It cannot be used in consumer boards that accept only unbuffered non-ECC modules. The registered design reduces electrical load on the memory controller, freeing headroom for larger total memory populations.

Kohokohdat

  • 16GB capacity expands server memory for heavier workloads
  • DDR4 2133MHz speed with CL15 latency supports responsive data access
  • ECC RDIMM registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation increases memory density per module
  • 2V standard voltage reduces power draw in compatible systems

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Will this 288-pin DDR4 2133 module run at the correct speed alongside my existing CL15 1.20V sticks?

Yes — it is a 16GB DDR4 2133 (PC4-17000) CL15 1.20V registered ECC DIMM, so it matches the voltage, speed and latency of identical-spec modules already installed.

How can I confirm the system sees the full 16GB registered ECC capacity after installation?

Enter the BIOS or Synology DSM info centre; both will report 16GB detected, show ECC active and list the module as a registered DDR4 2133 DIMM.

Does the single 16GB 2Rx4 stick ship alone or with any brackets or cables?

Only the 288-pin DDR4 RDIMM itself is included; no brackets, cables or additional hardware are supplied.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.