Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM module with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 server RAM

SKU CH-MQSZ-T16E5

16GB DDR4 2133 ECC registered server memory with CL15 latency and 1.2V operation

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 design
  • 16 GB capacity expands server memory for heavier workloads
  • 2133 MHz DDR4 speed matches PC4-17000 system requirements
  • CL15 latency and 1.20 V voltage deliver efficient registered performance
  • 2Rx4 dual-rank layout increases density on 288-pin DDR4 DIMM

Server-ready 16 GB DDR4 module

This 16 GB DDR4 2133 ECC RDIMM is built for servers and workstations that require registered memory with error correction. It operates at 1.20 V with a CL15 latency and uses a 2Rx4 rank configuration. The module replaces Crucial CT2K16G4VFD4213, CT16G4VFD4213 and CT2C16G4VFD4213 part numbers.

288-pin DIMM slot requirement

The stick fits a standard 288-pin DDR4 DIMM slot and draws 1.20 V, the normal DDR4 voltage. Registered buffering reduces electrical load on the memory controller, freeing headroom for larger memory populations in multi-socket platforms. ECC circuitry corrects single-bit errors without halting the system.

Sustained workload stability

Registered signalling and on-die ECC keep data integrity intact during long compute runs, virtualization hosting or database serving. The CL15 timing at 2133 MT/s delivers consistent throughput without the voltage headroom that higher-speed bins demand. Modules are tested before shipping to verify reliable operation under continuous load.

Kohokohdat

  • ECC protection guards data integrity with registered DDR4 design
  • 16 GB capacity expands server memory for heavier workloads
  • 2133 MHz DDR4 speed matches PC4-17000 system requirements
  • CL15 latency and 1.20 V voltage deliver efficient registered performance
  • 2Rx4 dual-rank layout increases density on 288-pin DDR4 DIMM

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Crucial
ModelCT2K16G4VFD4213, CT16G4VFD4213, CT2C16G4VFD4213
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesCT2K16G4VFD4213, CT16G4VFD4213, CT2C16G4VFD4213

Kysymyksiä tästä tuotteesta

How much power does the 1.20 V DDR4 module draw when the server runs continuously?

The module operates at the standard DDR4 voltage of 1.20 V, keeping power draw low during all-day workloads.

What motherboard slot is required for this 288-pin RDIMM?

It fits a standard DDR4 DIMM socket with 288 pins; the board must support registered ECC memory.

Which existing Crucial part numbers does this 16 GB module replace?

It is a compatible replacement for Crucial CT2K16G4VFD4213, CT16G4VFD4213 and CT2C16G4VFD4213.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.