Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 16GB DDR4 2133 ECC UDIMM 2Rx8 Server RAM

SKU CH-CHFP-TDBQD

16 GB DDR4 2133 ECC UDIMM module with CL15 latency for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity expands server memory headroom
  • DDR4 2133 MHz speed matches PC4-17000 spec
  • ECC UDIMM design detects and corrects data errors
  • 20 V operation meets DDR4 standard voltage
  • 2Rx8 dual-rank layout optimises chip density

Server Memory Upgrade

This 16 GB DDR4 module operates at 2133 MHz with CL15 latency and 1.20 V standard voltage. ECC UDIMM design provides error correction for data integrity in server and workstation environments. The unbuffered 2Rx8 organisation suits platforms that accept non-registered memory.

Sustained Workload Behaviour

ECC circuitry detects and corrects single-bit errors during continuous operation, reducing silent data corruption. Major-brand chips are tested for dependable performance under prolonged load. Standard DDR4 voltage keeps power draw predictable during extended sessions.

Replacement Context

Direct equivalent for Micron MTA18ASF2G72AZ-2G1 and MTA18ASF2G72AZ-2G1A1 part numbers. The jump is worthwhile when a system requires validated ECC unbuffered modules at this speed and capacity. Builders needing registered DIMMs or higher frequencies should verify platform support first.

Kohokohdat

  • 16 GB capacity expands server memory headroom
  • DDR4 2133 MHz speed matches PC4-17000 spec
  • ECC UDIMM design detects and corrects data errors
  • 20 V operation meets DDR4 standard voltage
  • 2Rx8 dual-rank layout optimises chip density

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much power does the 1.2V DDR4 module draw during continuous server workloads?

The module operates at the standard DDR4 voltage of 1.2V, keeping power draw low even under sustained 2133 MHz operation in server environments.

What motherboard slot and memory controller features are required for this ECC UDIMM to function?

A 288-pin DDR4 DIMM slot with an ECC-capable memory controller is needed; the module is unbuffered, so no registered-buffer support is required.

Will this 2Rx8 CL15 stick work reliably alongside older DDR4 2133 modules of different rank or latency?

Yes, it follows JEDEC DDR4 2133 CL15 timings at 1.2V, so it can run in mixed-rank populations when the motherboard trains all modules to the same speed and voltage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.