NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16 GB DDR4-2133 ECC load-reduced DIMM with CL15 latency and 1.2 V operation for server upgrades
This 16GB DDR4 2133MHz ECC LRDIMM module is built for servers and workstations that require registered memory with error correction. The load-reduced design lowers electrical load on the memory controller, allowing higher capacities per channel. It operates at 1.2V standard DDR4 voltage with CL15 latency.
The module uses a standard 288-pin DIMM form factor and major brand chips tested for dependable operation in multi-module server configurations. Load-reduced buffering means the memory controller sees less signal loading, which helps stability when populating multiple slots. ECC circuitry detects and corrects single-bit errors to protect data integrity.
The DDR4 2133MHz (PC4-17000) interface sets the maximum data rate this module can deliver; systems limited to lower speeds will downclock automatically. Load-reduced DIMMs require motherboards and CPUs that explicitly support LRDIMM technology — standard registered DIMM slots will not accept them. Verify your platform's qualified vendor list before installation.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at DDR4 2133 MHz, which is the PC4-17000 data rate; the memory controller will not exceed this frequency.
It fits a standard DDR4 DIMM socket with 288 pins; the motherboard must support load-reduced DIMMs, not just registered ones.
Power down, open the chassis, align the notch with the 288-pin slot, press firmly until both latches click, then enable ECC in the BIOS or the error-correction will stay inactive.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?