NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16 GB DDR4 2133 MHz ECC UDIMM module with CL15 latency and 1.2 V operation
This 16 GB DDR4 2133 MHz ECC UDIMM module is built for servers and workstations that require error-correcting memory. It replaces Dell part numbers 370-ACFT, 370-ACMH, 370-ACOZ, 7XRW4, A8661096 and SNP7XRW4C/16G. The single 288-pin DIMM runs at 1.20 V with CL15 latency.
The dual-rank 2Rx8 layout spreads memory accesses across two ranks, helping maintain throughput when the system runs memory-intensive workloads for extended periods. ECC circuitry detects and corrects single-bit errors on the fly, reducing the chance of data corruption during long compute jobs. Major-brand chips and A-Tech validation testing aim to deliver consistent stability.
The module conforms to the DDR4 PC4-17000 standard, capping the data rate at 2133 MT/s and the voltage at 1.2 V. Systems that only support lower DDR4 speeds or registered DIMMs will not accept this unbuffered ECC UDIMM. Buyers needing registered memory or capacities beyond 16 GB per module must choose a different product.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat low during all-day workloads.
It needs a DDR4 UDIMM slot that supports ECC unbuffered memory; the 288-pin keying prevents insertion into incompatible sockets.
Yes, it will run at the lowest common speed and latency, so mixing with slower or higher-latency DDR4 is stable but reduces overall bandwidth.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?