Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge contacts and black memory chips

A-Tech

A-Tech 16GB DDR4 2400 ECC RDIMM 2Rx8 CL17 1.2V server RAM

SKU CH-SDPQ-Y3HT9

16 GB DDR4 2400 ECC RDIMM module with CL17 latency and 1.2 V operation for server upgrades

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors automatically
  • DDR4 2400 MHz speed moves data at up to 19200 MT/s
  • 20 V operation reduces power draw and heat
  • 2Rx8 288-pin DIMM fits standard DDR4 server slots

Server memory upgrade for Samsung replacements

This 16GB DDR4 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. It serves as a direct replacement for Samsung part numbers M392A2K43BB0-CRC, M393A2K43BB1-CRC and M393A2K43CB1-CRC. Systems needing unbuffered UDIMMs or non-ECC memory cannot use this module.

DDR4 2400 registered DIMM constraints

The module operates at DDR4 2400 (PC4-19200) with a CAS latency of CL17 and a standard 1.2V voltage. Registered DIMMs add a clock cycle of buffering, so the memory controller must support registered operation; consumer desktop platforms that only accept unbuffered memory will not POST with this module installed.

2Rx8 rank and 288-pin form factor

This stick uses a dual-rank 2Rx8 organisation on a 288-pin DDR4 DIMM PCB. The rank configuration determines how the memory controller addresses the chips, so the motherboard must explicitly support 2Rx8 registered modules at this capacity.

Kohokohdat

  • 16 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors automatically
  • DDR4 2400 MHz speed moves data at up to 19200 MT/s
  • 20 V operation reduces power draw and heat
  • 2Rx8 288-pin DIMM fits standard DDR4 server slots

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I choose the 16 GB module or a different capacity?

This listing is a single 16 GB DDR4 2400 ECC RDIMM. Other capacities are not offered here.

What does the 2400 MHz rating deliver in a real server?

The module runs at DDR4 2400 (PC4-19200) with CL17 latency, providing the rated bandwidth when the platform supports that speed.

Does the 288-pin DDR4 RDIMM interface limit the usable speed?

The 288-pin registered DIMM form factor carries DDR4 2400 signals; the system memory controller ultimately caps the operating frequency.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.