Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB memory module with gold edge connectors and black chips

A-Tech

A-Tech 16GB DDR4 2400 ECC RDIMM 2Rx8 for Kingston 9995648-005.A00LF KSM24RD8/16MEI server RAM

SKU CH-YRZE-3ABEH

16GB DDR4 2400MHz ECC registered server memory module with CL17 latency

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity lets servers handle larger workloads
  • DDR4 2400 MHz speed moves data at PC4-19200 rates
  • ECC RDIMM with 2Rx8 organisation corrects errors in real time
  • CL17 latency at 1.20 V keeps response tight and power low
  • 288-pin registered DIMM drops straight into compatible Kingston sockets

16GB DDR4 2400 ECC RDIMM for Kingston Servers

This A-Tech 16GB DDR4 2400 ECC Registered DIMM is built for server and workstation systems needing reliable memory expansion. It serves as a direct replacement for Kingston part numbers KSM24RD8/16MEI and 9995648-005.A00LF. The module uses major-brand chips and undergoes quality-assurance testing for dependable operation in compatible platforms.

Installing the 288-Pin DIMM in Compatible Slots

Installation follows standard DDR4 DIMM procedure: align the notch on the 288-pin module with the motherboard slot key and press firmly until the retention clips engage. Ensure the system supports DDR4 2400 Registered ECC memory before purchase, as unbuffered or non-ECC platforms will not accept this module. Mixing registered and unbuffered DIMMs prevents the system from booting.

ECC Registered 2Rx8 Architecture Decides Fit

The single specification that determines compatibility is the ECC Registered 2Rx8 organisation combined with DDR4 2400 speed at 1.20V. Systems requiring unbuffered UDIMMs, load-reduced LRDIMMs, or different rank configurations cannot use this part. Verify the motherboard or server documentation lists RDIMM 2Rx8 support at PC4-19200 before ordering.

Kohokohdat

  • 16 GB capacity lets servers handle larger workloads
  • DDR4 2400 MHz speed moves data at PC4-19200 rates
  • ECC RDIMM with 2Rx8 organisation corrects errors in real time
  • CL17 latency at 1.20 V keeps response tight and power low
  • 288-pin registered DIMM drops straight into compatible Kingston sockets

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How can I confirm the 16GB DDR4 2400 ECC RDIMM is running at the correct 2400MHz speed and CL17 latency after installation?

Check the memory speed and CAS latency in your server BIOS or use a system information tool such as CPU-Z to verify the module reports 2400MHz and CL17.

What comes with the 16GB DDR4 2400 ECC RDIMM and do I need any extra brackets or cables?

The box contains one 16GB 288-pin DDR4 ECC RDIMM module; no additional brackets, cables or accessories are required for installation.

Should I choose the 2Rx8 16GB version or a different rank for my Kingston 9995648-005.A00LF replacement?

Select this 2Rx8 16GB module to match the original Kingston KSM24RD8/16MEI specification; other ranks may not be compatible with your server memory configuration.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.