Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 server memory module with gold contacts and black chips

A-Tech

A-Tech 16GB DDR4 2400 ECC RDIMM Supermicro Certified

SKU CH-6J1B-DHSHV

16 GB DDR4 2400 ECC registered DIMM, Supermicro certified for server reliability

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR4 2400 MHz for responsive multitasking
  • ECC registered RDIMM protects data integrity
  • Dual-rank 2Rx4 layout maximises memory bandwidth
  • 20 V standard voltage ensures efficient operation

16GB DDR4 2400 ECC RDIMM

This 16GB DDR4 2400 ECC RDIMM module is built for servers and workstations that require registered memory with error correction. The dual-rank 2Rx4 design and CL17 latency deliver stable throughput for multi-threaded workloads. It carries Supermicro certification and uses Hynix chips validated to PC4-19200 specifications.

Replaces lower-capacity or non-ECC DDR4 RDIMMs

Upgrading to this 16GB registered module makes sense when your platform supports ECC RDIMMs and you need higher density per slot. The jump is worth it if your current DIMMs are single-rank, slower than 2400 MT/s, or lack the Supermicro qualification your system demands.

Check your platform before ordering

Verify that your motherboard and CPU support DDR4 RDIMMs at 2400 MT/s with 1.2V operation and 288-pin form factor. Confirm the maximum registered DIMM capacity per channel and that the BIOS recognises Supermicro-certified modules. Ensure all populated slots can run at the same speed and rank configuration.

Kohokohdat

  • Supermicro certified for guaranteed server compatibility
  • 16 GB DDR4 2400 MHz for responsive multitasking
  • ECC registered RDIMM protects data integrity
  • Dual-rank 2Rx4 layout maximises memory bandwidth
  • 20 V standard voltage ensures efficient operation

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-HL01-ER24
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR416L-HL01-ER24 (HMA42GR7AFR4N-UH)

Kysymyksiä tästä tuotteesta

Does the 288-pin RDIMM fit a standard DDR4 server slot?

Yes, the module uses the 288-pin RDIMM form factor designed for DDR4 registered DIMM slots in compatible servers.

What BIOS setting is often missed when installing this ECC registered memory?

Enable ECC error correction in the BIOS after installation; the system will not use the ECC feature unless the option is turned on.

When should the 16 GB DDR4 2400 module be replaced?

Replace the module if memory diagnostics report uncorrectable ECC errors or the system shows repeated crashes linked to memory failure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.