Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2666 ECC RDIMM 2Rx8 for HP 835955-B21 server RAM

SKU CH-ZK5R-7SEYH

16GB DDR4 2666 ECC RDIMM server memory with registered 2Rx8 design for HP systems

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR4 2666 server memory expands capacity for heavier workloads
  • ECC RDIMM registered design detects and corrects data errors automatically
  • CL19 latency at 1.20V balances speed with standard DDR4 power draw
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • Tested compatible replacement for HP 835955-B21 and related part numbers

16GB DDR4 ECC RDIMM for HP servers

This 16GB DDR4 2666 ECC registered module replaces HP part numbers 835955-B21, 835955-B211, 835955-K21, 835955-S21, 838089-H21, 838089-K21, 840756-191, 840756-C91 and P18444-B21. It is built for server and workstation systems that require registered ECC memory. Buyers needing unbuffered UDIMM or non-ECC memory for desktop boards cannot use this module.

Sustained load behaviour with registered ECC

The registered design places a buffer on each command, adding one cycle of latency but reducing electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors and detects multi-bit errors, protecting data integrity under heavy, long-running workloads. CL19 timing at 1.20V delivers stable throughput for virtualization, database and compute tasks that run for hours without reboot.

Installation notes and common issues

The 288-pin DIMM installs in standard DDR4 RDIMM slots; the registration notch position matches the HP-qualified pinout. Systems that require specific rank populations or maximum rank-per-channel limits may reject a 2Rx8 module if the platform firmware expects 1Rx4 or 1Rx8 configurations. Always verify the server memory population rules in the vendor documentation before installing.

Kohokohdat

  • 16GB DDR4 2666 server memory expands capacity for heavier workloads
  • ECC RDIMM registered design detects and corrects data errors automatically
  • CL19 latency at 1.20V balances speed with standard DDR4 power draw
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • Tested compatible replacement for HP 835955-B21 and related part numbers

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much power does this 1.20 V DDR4 2666 registered module draw under continuous load?

It runs at the standard DDR4 voltage of 1.20 V. Actual power draw depends on the server platform and workload, so check your system documentation for detailed figures.

What must my server provide to use this 288-pin ECC RDIMM?

A DDR4 DIMM slot that supports registered ECC memory at 2666 MT/s, 1.2 V operation and 2Rx8 organisation.

Will this 2666 MHz CL19 module run reliably alongside slower DDR4 sticks already installed?

The module is rated for 2666 MHz CL19. When mixed with slower DDR4, the system typically clocks all modules to the lowest common speed and loosest timings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.