Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black memory chips and a silver label

A-Tech

A-Tech 16GB DDR4 2666MHz ECC RDIMM 1Rx4 Server RAM

SKU CH-13FA-DZAK6

16GB DDR4 2666MHz ECC registered server memory with 1Rx4 organisation and CL19 latency

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 2666 MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for reliable operation
  • 1Rx4 single-rank layout keeps signal integrity at full speed
  • 2 V standard voltage reduces power draw in dense configurations
  • 288-pin DIMM form factor fits compatible HP server slots

16GB DDR4 2666MHz ECC RDIMM Server Module

This 16GB DDR4 2666MHz ECC RDIMM module targets server and workstation administrators who need registered memory with error correction. The single 1Rx4 rank DIMM operates at 1.2V standard voltage with CL19 latency. It serves as a direct replacement for listed HP part numbers including P26030-001 and 881067-B21.

Registered ECC Design for Multi-DIMM Configurations

The registered buffer and ECC functionality allow stable operation when multiple modules populate a server motherboard. Error correction detects and corrects single-bit errors to maintain data integrity under sustained workloads. Major brand chipsets undergo quality assurance testing before shipment. No additional software or accessories are included with the memory module itself.

DDR4 288-Pin Interface Limits Speed and Density

The DDR4 288-pin interface caps transfer rates at 2666MHz PC4-21300 for this module. Registered DIMMs require motherboard slots wired for registered signalling; they will not function in unbuffered consumer boards. Single-rank 1Rx4 organisation limits maximum capacity per channel compared to dual-rank alternatives. Buyers needing higher frequencies or unbuffered operation must select a different memory type.

Kohokohdat

  • 16 GB DDR4 2666 MHz capacity handles heavy server workloads
  • ECC registered design corrects data errors for reliable operation
  • 1Rx4 single-rank layout keeps signal integrity at full speed
  • 2 V standard voltage reduces power draw in dense configurations
  • 288-pin DIMM form factor fits compatible HP server slots

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Will the registered ECC RDIMM need any firmware updates or reconfiguration when I add it to a compatible HP server?

The module is a direct replacement for HP part numbers such as 815098-B21 and P26030-001, so it is recognised by the system BIOS without extra firmware steps.

What limits sustained throughput on this DDR4 2666 CL19 1Rx4 module?

The CL19 latency at 2666 MT/s sets the timing ceiling, while the single-rank x4 organisation caps maximum bandwidth per channel.

How much heat and power does the 1.2 V DDR4 RDIMM produce during continuous operation?

At the standard 1.20 V DDR4 voltage the module draws minimal power and generates low heat, aided by the registered buffer that reduces electrical load on the memory bus.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.